0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Integrated Current Mirror vs External Sampling: Benchmarking Analysis of SS6230A Against DRV8231A and A4950

Previously, we introduced the basic specifications of the SS6230A (“A New Domestic Motor Driver Choice | SS6230A, Integrated Current Sensing 30V/4A H-Bridge Driver Chip”). Today we put it together with TI’s DRV8231A and Allegro’s A4950 to see how competitive it is in the market among similar solutions. All three are 8-pin brushed […]

2026-10-23 Solution Applications
集成电流镜 vs 外部采样:SS6230A与DRV8231A、A4950的对标分析

Previously, we introduced the basic specifications of the SS6230A (“A New Domestic Motor Driver Choice | SS6230A, Integrated Current Sensing 30V/4A H-Bridge Driver Chip”). Today we put it together with TI’s DRV8231A and Allegro’s A4950 to see how competitive it is in the market among similar solutions.

All three are 8-pin brushed direct-current motor drivers, and their target application markets overlap heavily. The SS6230A and DRV8231A integrate the current mirror into the chip, while the A4950 places a sense resistor in series in the power loop. The presence or absence of this resistor brings out the differences among the three chips in external components, current sensing, and current limiting.

Part One: Benchmarking against DRV8231A: detail differences under the same architecture

The DRV8231A is one of TI’s representative models with the same architecture and is also the one closest to the SS6230A in technical route. The pin positions of the two chips correspond one-to-one; the positions of sensing, control, power supply, and output are all the same. For package options, the DRV8231A offers a smaller WSON (2×2) package.

Parameter SS6230A DRV8231A
Voltage range 4.5V to 30V, 26V recommended 4.5V to 33V, 35V max
Peak output current 4A (VM≥5.5V); 3.5A at 5.5V 3.7A
Total on-resistance 450mΩ 600mΩ
Logic level 3.3V/5V 1.8V/3.3V/5V
Current mirror gain and error 1500μA/A,±5% 1500μA/A,±6%
Sleep power consumption <1μA 1μA
Protection UVLO、OVP、OCP、TSD UVLO、OCP、TSD
Package ESOP-8 (body 3.9×4.9, lead span 6.0 mm) HSOP-8 (same); WSON-8 (2×2)

Both have built-in current mirror sensing, the same gain, and the same reference voltage range (0 to 3.6 V), meaning the sense resistor and the conversion formula in firmware can generally be reused for each other.

Although they share the same core functions, the two focus on different areas: SS6230A emphasizes accuracy, while DRV8231A emphasizes response. SS6230A's current mirror error is ±5%, slightly better than DRV8231A's ±6%; however, in terms of detection response, SS6230A takes about 4 µs from low-side MOS turn-on to sense output settling, while DRV8231A takes about 1.1 µs, so DRV8231A is faster.

The parameter differences are mainly in the power stage and voltage. The total H-bridge on-resistance of SS6230A is 450 mΩ, while that of DRV8231A is 600 mΩ; at 12 V/24 V, the peak output of SS6230A is 4 A and that of DRV8231A is 3.7 A. At 0.8 A, the conduction loss difference between the two is less than 0.1 W; at 2 A, it is about 0.6 W. The difference is small at low current, and the higher the current, the more obvious the advantage of 450 mΩ. However, at low supply voltages below 5.5 V, the peak current of SS6230A is derated to 3.5 A.

Voltage is where DRV8231A has the advantage. The recommended operating maximum of SS6230A is 26 V (absolute maximum 30 V), while the recommended maximum of DRV8231A reaches 33 V (absolute maximum 35 V). In a 24 V system, SS6230A has only 2 V of voltage margin, while DRV8231A has 9 V; for projects with large power-supply fluctuations, DRV8231A is more stable.

In addition, the logic input of DRV8231A supports 1.8 V, while SS6230A is specified for 3.3 V/5 V. In terms of protection functions, SS6230A adds an overvoltage interlock protection (OVP) compared with DRV8231A; it triggers only when both output overcurrent and VM overvoltage conditions are met, providing additional protection in extreme dual-fault scenarios.

II. Benchmarking Against the Classic A4950: Cost and Experience Differences Between Two Current-Sensing Schemes

The A4950 is a classic solution widely used in the industry. It follows the technical route of an external power sense resistor, and its most fundamental difference from SS6230A lies in this resistor.

Calculated for a 1.5 A current limit and a 3.3 V reference voltage, A4950 requires a 0.22 Ω power sense resistor. At 0.8 A operating current, the resistor dissipates about 0.14 W; at the 1.5 A current limit, it dissipates about 0.5 W. A 1 W resistor in a 2512 package is usually required, and trace width and thermal layout must also be considered.

By contrast, SS6230A integrates current sensing inside the chip, so there is no additional sense resistor in the main power loop; under the same reference conditions, only an ordinary 1.5 kΩ signal resistor needs to be connected to the IPROPI pin. At 0.8 A operation, only 1.2 mA flows through it, dissipating about 2 mW, and an 0402/0603 package is sufficient. This saves the cost of one power resistor while also freeing up PCB area, reducing routing difficulty, and reducing extra heat generation.

Parameters SS6230A A4950
Voltage Range 4.5V to 30V, 26V recommended 8V~40V
Peak Output Current 4A (VM ≥ 5.5V); 3.5A at 5V 3.5A (continuous, 100% duty cycle)
Total On-Resistance 450mΩ 600mΩ
Logic Level 3.3V/5V 3.3V/5V
Current Sensing Integrated current mirror, IPROPI output External sense resistor
Sleep power consumption <1μA 10μA
Protection UVLO、OVP、OCP、TSD UVLO、OCP、TSD
Automotive-grade version None Yes
Package ESOP-8(3.9×4.9) SOICN-8(3.9×4.9)

A4950's advantages lie in voltage and automotive qualification. Its recommended operating range is 8V~40V, and it can even cover 36V systems. Its submodel A4950K can meet AEC-Q100 automotive qualification, which SS6230A currently lacks. In terms of peak current, A4950 is 3.5A, while SS6230A is 4A at 12V/24V; in terms of on-resistance, A4950 is 600mΩ, while SS6230A is 450mΩ; in terms of sleep current, A4950 is 10µA, while SS6230A is less than 1µA. What A4950 adds is a high-voltage grade and automotive qualification, while SS6230A has more advantages in the power stage, integrated detection, and low-power sleep.

III. Summary

The differences among the three chips ultimately come down to three areas: power stage, voltage grade, and current sensing. SS6230A has advantages in the power stage and integrated sensing, DRV8231A has advantages in logic compatibility and sensing response, and A4950 has advantages in 40V and automotive qualification. The voltage grade is currently the weakest link for SS6230A, and it will be strained when facing 24V systems.

Overall, SS6230A is a very competitive domestic replacement solution for DRV8231A and the commercial-grade A4950, and in the same 8-pin, integrated current-mirror track, it achieves lower on-resistance and higher peak current while retaining complete current feedback. For high-volume, broad 12V/24V consumer brushed motor applications, these features precisely hit the core requirements and have clear value in cost reduction, solution simplification, and supply chain backup.

For more information about SS6230A or to request samples, please contact: sales@chiplinkstech.com; Engineer Chen, 13924675549.

Sample request attached:

WeChat Official Account

← Back to Solutions