0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

First Choice for Battery-Powered Devices! MT865X Series Omnipolar Hall-Effect Switches: Simplified Design + Longer Battery Life

An omnipolar Hall switch, also called a non-polar Hall switch, is a Hall-effect sensor that responds to both the south (S) and north (N) poles of a magnetic field. Its core operating feature is: when any magnetic pole approaches and the magnetic field strength exceeds the operating threshold (BOP), the output turns on; when the magnetic field is removed and the strength drops below the release threshold (BRP), the output turns off. No specific magnetic pole is required for triggering. […]

2025-10-23 Solution Applications
电池供电设备首选!MT865X系列全极霍尔开关:简化设计+延长续航

An omnipolar Hall switch, also called a non-polar Hall switch, is a Hall-effect sensor that responds to both the south (S) and north (N) poles of a magnetic field. Its core operating feature is that when any magnetic pole approaches and the magnetic field strength exceeds the operating threshold (BOP), the output turns on; when the magnetic field is removed and the strength drops below the release threshold (BRP), the output turns off. No specific magnetic pole is required for triggering, so it can be likened to a 'sensing door that responds when approached from any direction.' It offers advantages such as small size, high sensitivity, long life, and high reliability, and is widely used in electronics, power, instrumentation, automotive, communications, and other fields.

1. MT865X Series Omnipolar Hall Switches

The MT865X series of omnipolar Hall switches is launched by MagnTek (now part of NOVOSENSE) and uses a CMOS process (complementary metal-oxide-semiconductor, an integrated circuit design process that fabricates NMOS and PMOS devices on the same silicon substrate). The Hall IC integrates a high-sensitivity horizontal Hall plate, sleep/wake-up logic circuitry for mode control, a low-power on-chip oscillator, a low-noise analog signal chain with dynamic offset cancellation, a hysteresis comparator, and an output driver, delivering high performance and high reliability. With a 2.0 V to 5.5 V operating voltage and nanoampere-level power consumption, it is well suited to battery-powered devices. Its wide -40°C to 125°C operating temperature range, combined with excellent temperature compensation, maintains excellent performance and consistency even in harsh environments.

Using MT8651 as an example, key parameters:

Product Model MT8651
Type Omnipolar switch
Sampling frequency 20Hz
Operating voltage 2.0~5.5V
Power consumption 1.2μA
Operating temperature -40℃~125℃
Operate point (BOP) ±37Gs
Release point (BRP) ±25Gs
Output type Open-drain output
Package SOT-23;Flat TO-92

Functional block diagram

II. Core Technology: Designed to Solve Problems

1.Omnipolar response, simplified assembly, improved experience

Compared with traditional unipolar Hall switches that respond only to the N pole or S pole and require strict magnetic pole alignment during assembly; otherwise, the device cannot be triggered, the MT865X is an omnipolar Hall switch. It uses a "horizontal dual Hall-element" layout and responds when either the N pole or S pole approaches—when the magnetic flux density (B) is greater than the operate point (BOP), the output turns on (low level); when the magnetic flux density (B) is lower than the release point (BRP), the output turns off (high level). For engineers and manufacturers, this design eliminates the need to design a magnetic pole positioning structure, and end-product production does not need to distinguish magnetic pole direction, greatly simplifying the installation and design processes; for end users, no matter which pole of the magnetic field is used to touch it, the device can accurately identify and respond, greatly improving the user experience.

2.Dynamic offset cancellation, stable output

The "offset voltage" of Hall switches (output deviation at zero magnetic field caused by temperature changes and power supply fluctuations) is an important factor affecting the accuracy and stability of output signals. The MT865X series Hall-effect switch ICs integrate a low-noise analog signal chain with dynamic offset cancellation to reduce or eliminate offset voltage.

Principle of operation: When the internal Hall plate captures a magnetic field signal, it converts it into an electrical signal. When the electrical signal is amplified by the amplifier, the circuit detects the offset voltage in real time; the detected offset voltage is compensated in real time by adjusting the amplifier bias voltage to eliminate the offset effect. After dynamic offset cancellation, the signal is sent to subsequent processing circuits, such as the comparator and output driver, ultimately producing a stable output signal. This technique effectively improves the accuracy and stability of the MT865X series ICs, ensuring reliable performance under various operating conditions.

Relationship Between Magnetic Characteristics and Temperature (BOP and BRP)

3.Ultra-low power consumption, tailor-made for battery-powered devices

The MT865X series integrates a sleep/wake dual-mode architecture internally to reduce long-term standby power consumption: when the external magnetic field strength is below BRP (e.g., MT8651 < ±25 Gs), the chip enters sleep mode, automatically shutting down non-essential blocks such as the amplifier and oscillator, and retaining only the necessary circuits to monitor magnetic field changes. In sleep mode, the chip's supply current drops to 0.6–1.4 μA (Vcc = 3.6 V), thereby reducing power consumption. When the external magnetic field strength exceeds BOP (e.g., MT8651 > ±37 Gs), the monitoring circuit triggers a wake-up signal, and the chip activates all blocks within 10 μs (typical TAW), turns on the output (Low), and begins normal operation. Mode switching is implemented by an internal hysteresis comparator to prevent frequent output switching when the magnetic field changes, so there is no need to worry about output stability.

It features unique clock optimization: a built-in low-power oscillator controls the sleep/wake cycle, with a duty cycle of only 0.02% (50 ms sleep + 10 μs wake), further reducing average energy consumption. Under a 3.6 V supply, power consumption can be as low as 1.2 μA. This feature gives the MT865X series a significant advantage in IoT devices requiring long-term standby. For example, with a CR2032 coin cell (capacity 220 mAh), the MT8651 can achieve a standby battery life of approximately 220 mAh ÷ 1.2 μA ≈ 21000 hours (nearly 2.4 years) during quiescent operation, meeting the "maintenance-free" requirements of IoT devices.

III. Flexible Model Selection: Meeting Different Application Requirements

The MT865X series offers multiple model options, including products in different package types and sensitivities, to meet various low-power position detection requirements. For example, the MT8651 has an operating point (BOP) of ±37 Gs and a release point (BRP) of ±25 Gs; the MT8652 has an operating point of ±16 Gs and a release point of ±9 Gs. Users can select the appropriate model based on the magnetic field strength of the actual application.

The MT865X series also offers customers various packages: the SOT-23-3L package, whose volume is less than one-tenth of a small fingernail, is for surface mounting and is suitable for space-constrained application scenarios such as TWS earbud charging cases, smartwatches, and micro sensor nodes; the flat TO92 is for through-hole mounting and is suitable for scenarios such as industrial valves, appliance control panels, and upgrades of legacy equipment. All packages comply with RoHS standards and align with environmental protection principles.

MT865X Series Pinout and Package Diagram

IV. Typical Application Circuits and Design Recommendations

1.Typical Application Circuit (Using MT8651AT as an Example)

  • The MT865X series has open-drain outputs and requires an external pull-up resistor (RL). The recommended circuit is as follows:
  • Power supply filtering: Connect a 100 nF ceramic capacitor (C1) between the VCC pin (pin 1) and GND (pin 3) to suppress power supply noise;
  • Output filtering: Connect a 1 nF ceramic capacitor (C2) between the OUT pin (pin 2) and GND to reduce output signal jitter;
  • Pull-up resistor: Connect the OUT pin to VCC through RL (1 kΩ to 10 kΩ, selected according to the load) to ensure stable output at high level.
  • MT8651AT Typical Application Circuit

2.Design Considerations

  • Magnetic field direction: The Hall plate responds only to the magnetic field component perpendicular to the top surface of the package. During installation, ensure that the magnet's magnetic field direction is perpendicular to the top surface of the chip;
  • Thermal design: The SOT-23-3L package has relatively high thermal resistance (301°C/W). If IOUT remains close to 8 mA (maximum output current) for extended periods, reserve space for heat dissipation;
  • ESD protection: Although the chip has built-in ESD protection (±4000 V HBM, ±1000 V CDM), grounding is required during soldering to avoid electrostatic damage;
  • Hysteresis selection: The model must be selected according to magnetic field fluctuations—when the ambient magnetic field is unstable (e.g., industrial scenarios), prioritize MT8651 (BHYST = 3–18 Gs) to avoid false triggering; for small magnetic field scenarios (e.g., miniature sensors), select MT8652 (high sensitivity).

V. Diverse Application Scenarios: From Consumer Electronics to Industrial Appliances

With its high performance and low power consumption advantages, the MT865X series omnipolar Hall-effect switches can be widely used in diverse scenarios:

  • Consumer electronics: The MT865X series ICs have a tiny body and ultra-low power consumption, extending battery life and making them suitable for space-constrained portable consumer electronics applications. Taking the TWS earbud charging case as an example, the MT865X is used to detect the open/closed state of the case lid, with no need to distinguish magnetic pole direction, making the assembly process simpler. Reports indicate that DJI charging cases have adopted the MT8651.
  • Smart home: It can be used in magnetic door/window sensors to implement security alarm functions; it can also be integrated into smart water bottle caps to detect whether the cap is properly closed, etc.
  • Industrial: Its series products feature a wide operating temperature range of -40°C to 125°C, enabling long-term stable operation in harsh environments. They can be used in industrial valve position detection, travel limit switches, and other scenarios.

VI. Conclusion

According to market research reports, global sales of micropower omnipolar Hall-effect switches reached 650 million units in 2024, demonstrating huge market potential. These components are widely used in battery-powered devices, smart homes, wearable electronics, industrial automation, and other fields. The MT865X series omnipolar Hall switches, with multiple advantages such as omnipolar response, ultra-low power consumption, high integration, and flexible model options, not only simplify product design and manufacturing processes but also bring longer battery life and more stable performance to end devices.

For more information about the MT865X series Hall ICs or to request samples, please contact NOVOSENSE's officially authorized distributor: Shenzhen Zhilian Microelectronics, Email:sales@chiplinkstech.com, which provides part selection services and technical support. We look forward to working with you.

附样品申请二维码

Appendix: Sample Request

微信公众号二维码

WeChat Official Account

← Back to Solutions