0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

In-depth Analysis of Domestic Motor Driver IC: A Dual-Channel Integrated Motor Driver That Can Replace DRV8813

In modern office automation equipment and smart home appliances, the smooth, efficient, and reliable operation of motors is key to determining product performance and user experience. Whether it's the precise paper feeding of a printer, the smooth movement of a scanner, or the smooth start and stop of smart curtains, behind it all requires a powerful 'power heart'. A domestic dual-channel H-bridge current-controlled motor driver (hereinafter referred to as [...]

2026-01-12 Solution Applications
深度解析国产电机驱动IC,一颗可替代DRV8813的双通道集成电机驱动器

In modern office automation equipment and smart home appliances, the smooth, efficient, and reliable operation of motors is key to determining product performance and user experience. Whether it's the precise paper feeding of a printer, the smooth movement of a scanner, or the smooth start and stop of smart curtains, behind it all requires a powerful 'power heart'. A domestic dual-channel H-bridge current-controlled motor driver (hereinafter referred to as 'domestic DRV8813'), with high integration, wide-range adaptability, and comprehensive protection, can replace DRV8813 and become an ideal choice for motion control in office equipment and smart home appliances.

1. Integrated Drive

Traditional office equipment motor control solutions often face multiple challenges such as tight space, high power consumption, system complexity, and cost pressure. Engineers need to coordinate multiple discrete devices or single-channel driver chips within limited PCB space, which not only increases design difficulty but also affects the reliability and energy efficiency of the entire machine.

Facing traditional pain points, the 'domestic DRV8813' integrates two complete H-bridge drive circuits into a compact 9.6mm×4.3mm body. This means that with just one chip, it can independently control two brushed DC motors (such as printer paper feeding + print head movement), or drive one bipolar stepper motor, and can also adapt to inductive loads such as solenoids, without the need for additional expansion devices.

At the same time, it integrates rectifier circuits, current limiting circuits, and protection mechanisms. Only key pins need to be paired with specific peripheral components, and no additional protection devices are required, reducing PCB layout space and lowering design difficulty and BOM cost. This highly integrated design directly resolves the core contradiction between space and complexity, clearing obstacles for equipment miniaturization and intelligent upgrading.

Functional Block Diagram

II. Performance Highlights

1. Wide-Voltage Drive, Flexible Operation

The “domestic DRV8813” has the same wide operating voltage range as the DRV8813, easily covering mainstream device power-supply solutions from adapter-powered supplies to 24 V/36 V systems, with a supply slew rate of 1 V/µs. Each channel can provide up to 2.5 A peak output current and 1.75 A RMS current (at 24 V, Ta=25°C, with proper heat dissipation), ensuring ample power and stable operation when the motor starts, changes speed, or experiences sudden load changes.

2. High Efficiency and Low Power Consumption, “Cool” Operation

It uses an advanced process design, and the on-resistance (RDSon) of the H-bridge power MOSFETs is as low as 350 mΩ typical (HS+LS). At 25°C, the high-side is 0.17 Ω and the low-side is 0.15 Ω; at 85°C, the high-side is 0.2 Ω and the low-side is 0.18 Ω. Conduction losses are low, improving energy efficiency. Combined with the exposed thermal pad on the bottom of the package, heat can be efficiently dissipated through the PCB, allowing the device to run “cooler” and avoiding performance degradation caused by high temperatures.

The “domestic DRV8813” can also activate a low-power sleep mode through the nSLEEP pin, reducing quiescent current to 7–20 µA in standby to meet the device’s low standby power consumption requirements.

3. Intelligent Control Interface, Simple and Easy to Use

The “domestic DRV8813” uses EN (enable)/PH (direction) control logic interfaces. This simple and intuitive digital control method simplifies software integration with the host MCU, enabling engineers to quickly complete development and deployment and shortening time to market.

4. Comprehensive Protection, Solid as a Rock

The chip integrates multiple hardware protection circuits and, together with the nFAULT fault indicator pin, provides a complete protection chain: anomaly detection → fault reporting → safe shutdown:

  • Overcurrent Protection (OCP): When the current through the power transistors exceeds the limit and persists beyond the 2.6 µs spike time, all H-bridge MOSFETs are turned off and nFAULT is pulled low; recovery requires a reset or power cycle;
  • Undervoltage Lockout (UVLO): When the VM voltage falls below the threshold, all internal circuits are shut down and the logic is reset; operation restarts automatically when the voltage recovers, preventing abnormal operation at low voltage;
  • Thermal Shutdown (TSD): Junction temperature is monitored in real time. If it exceeds the limit, the output is shut down immediately and the nFAULT pin is pulled low; operation recovers automatically once the temperature drops to a safe level.

5. Flexible Functions for Precision Control

The "Domestic DRV8813" supports full-step, 2-microstep, and 4-microstep modes for stepper motors, and can achieve higher microstepping through software. Combined with three decay modes, it effectively smooths motor motion, reduces noise and vibration, and improves motion precision.

Its DECAY pin allows flexible selection of decay modes to suit different load characteristics and optimize smooth motor start/stop:

  • Low level → slow decay: the winding current flows through the low-side MOSFETs, resulting in smooth deceleration;
  • Floating → mixed decay: fixed 15 μs total decay time (30% fast decay + 70% slow decay), balancing response speed and smoothness;
  • High level → fast decay: H-bridge in reversed state, current decays rapidly, resulting in rapid deceleration.

 3. Key Specifications Table

Type Dual-channel H-bridge current-controlled motor driver
Control Interface EN/PH control interface
Current Control 2-bit current control, 4 adjustable current steps
Output Capability Maximum peak current per bridge 2.5 A, RMS current 1.75 A
Operating Voltage Wide range 8.2 V to 45 V
On-Resistance Typical value 350 mΩ
Key Protections Overcurrent (OCP), Undervoltage Lockout (UVLO), Thermal Shutdown (TSD)
Operating Temperature -40°C to 85°C, junction temperature -40°C to 150°C
Stepper Motor Functions Full-step, 2-microstep, 4-microstep (software-expandable to higher microstep resolution)
Decay Modes Fast decay, slow decay, mixed decay
Package eTSSOP-28 with exposed thermal pad

Domestic IC pinout view

IV. Enabling Diverse Scenarios

The domestic DRV8813, with its flexible, reliable, and efficient characteristics, can become an ideal choice for a variety of precision motion control applications.

  • Office automation (OA): It can serve as the 'motion hub' for printers, scanners, copiers, and automatic binding machines, precisely controlling key actions such as paper feeding, imaging, and scanning; it can also drive the paper output roller motor.
  • Financial equipment: It drives the cash dispensing module of ATMs and the transport wheels of banknote counters, offering safety, reliability, and durability.
  • Smart home appliances: Precision motion control in smart curtains, height-adjustable desks, coffee machines, and premium toys, with high cost-effectiveness and excellent value for money.
  • Industrial control: actuator driving and lighting control in small automation equipment, instruments, and vending machines, with wide-voltage compatibility for industrial power environments.

V. Comparison with Comparable International Products

In the motor driver IC field, comparable international products (such as TI DRV8813) have long been industry benchmarks for their stable performance. As a domestic IC, this product can match or even surpass them in core performance through precise parameter optimization and feature upgrades, demonstrating strong domestic substitution capabilities:

Performance Category Domestic IC DRV8813
Operating Voltage 8.2V~45V 8.2V~45V
Output Capability 2.5 A peak, 1.75 A RMS 2.5 A peak, 1.75 A RMS
On-resistance 350mΩ 400mΩ
Operating current 3.5~8mA 5~8mA
Sleep current 7~20uA 10~20uA
Current-sense blanking time 1.2us 3.75us
Replacement-compatible Core pin definitions are identical, functions are compatible, and logic levels and control protocols are identical

DRV8813 Pinout View

VI. Conclusion

The domestic DRV8813 uses integrated design to solve the complex challenges of traditional solutions, uses wide-range adaptation plus comprehensive protection to cover multi-scenario requirements, and uses flexible functions plus excellent performance to support precision motion, providing a reliable domestic dual-channel integrated motor driver solution for office equipment and other motor-integrated applications. Whether for intelligent upgrades of office equipment, the high-reliability requirements of financial equipment, or the low-power requirements of smart home appliances, it can provide a drive solution with fewer components, simplified design, and high reliability, becoming a reliable partner for engineers in realizing innovative designs.

In a fiercely competitive market, details determine success or failure, and innovation stems from the core. Choosing domestic ICs is indeed a better choice.For more information about this “domestic DRV8813” or to request samples, please contact the official authorized distributor: sales@chiplinkstech.com (email), WeChat official account: Zhilian Micro - Motor Control Chips, which can provide product selection services and technical support.

附样品申请二维码

Appendix: Sample Request

微信公众号二维码

WeChat Official Account

← Back to Solutions