0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Open-Source Ventilator Design - Based on TMC4671

Trinamic Open-Source Ventilator To address the medical equipment demand from the COVID-19 outbreak, Trinamic developed the Trinamic Open-Source Ventilator (TOSV). TOSV uses modules based on the TMC4671-LA and TMC4671-Eval-Kit. The PCB of the compact integrated module can handle all [...]

2020-05-20 Solution Applications
开源呼吸机设计- 基于TMC4671

Trinamic Open-Source Ventilator

To address the medical equipment demand from the COVID-19 outbreak, Trinamic developed the Trinamic Open-Source Ventilator (TOSV). TOSV uses modules based on the TMC4671-LA and TMC4671-Eval-Kit. The PCB of the compact integrated module can handle all driver functions and provide an interface for pressure sensors. Single-board computers such as Raspberry Pi can be used to provide control, user interface, and safety functions.

About the TMC4671

开源呼吸机设计- 基于TMC4671
mark

Trinamic Motion Control introduced the TMC4671-LA, the world's first fully integrated servo controller IC with FOC for BLDC/PMSM, 2-phase stepper motors, DC motors, and voice coils.

Trinamic gathered input from market leaders in electric vehicles, robotics, laboratory automation, and pump and blower design, and fully optimized the TMC4671-LA by integrating all necessary motor control functions into a single compact IC. By handling all motor control functions in a compact servo controller IC, the TMC4671-LA offloads critical real-time tasks from the processor and software.

“We worked with market leaders to understand the challenges they faced when building the TMC4671-ES (the initial version of the dedicated servo controller IC), and used insights from extensive testing to create this highly improved version,” said Trinamic CEO Michael Randt. “The TMC4671-LA allows our customers to build a servo drive in one day while offering a lower cost of ownership and best-in-class performance.”

Features:

  • Servo controller with field-oriented control (FOC)
  • Three-phase PMSM / BLDC, two-phase stepper motors, and single-phase DC motors
  • Torque control (FOC), speed control, and position control
  • Integrated ΔΣ ADC front end
  • Encoder engine: analog/digital Hall, analog/digital encoder
  • Fast PWM engine (25 kHz … 100 kHz)
  • Application SPI + debug (UART, SPI)
  • Step/Direction Interface (S / D)

FOC

开源呼吸机设计- 基于TMC4671

markFOC (The Field Oriented Control) field-oriented control, independently developed by K. Hasse of TU Darmstadt and Felix of TU Braunschweig. FOC is a current regulation scheme for electric motors that considers the direction of the magnetic field and the position of the motor rotor; the regulation strength should make the motor produce the required torque value as the target torque. FOC maximizes active power and minimizes idle power (reduces power consumption). The intelligent closed-loop control shown in the figure

Development Board

1. TMC4671 + TMC6200 BOB development board.

开源呼吸机设计- 基于TMC4671

mark

  • TMC4671-ES hardware servo controller
  • TMC6200-TA hardware gate driver + MOSFET
  • Power supply and I/O voltage: 3.3 V and 5 V
  • Motor supply voltage input (7 … 48 V)
  • Motor phase current max 10A peak (using
  • RV_STRENGTH set to 'Weak' for optimal switching performance)
  • Communication and configuration via SPI
  • Real-time monitoring interface for real-time debugging -- tuning and adjustment using Trinamic's RTMI adapter
  • Additional step/direction interface from mobile device - controller (does not work on TMC4671-ES)
  • Encoder and Hall feedback
  • Driver fault and status indicator LEDs

2. TMC471-EVAL-KIT complete kit

开源呼吸机设计- 基于TMC4671
mark

The power board can support 10A/70V.

← Back to Solutions