0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Omnipolar Response + Wide Voltage Compatibility: MT855X Series Hall-Effect Switches, Industrial-Grade Sensors

As the pulse of smart manufacturing beats on 24V industrial buses, as automotive electronics seek stability amid fluctuating voltages, and as IoT devices operate in harsh environments—these complex scenarios impose industrial-grade requirements on tiny sensing components. A stable signal often requires a “sensing heart” that can adapt to complex power environments. The MT855X series omnipolar Hall-effect switches […]

2025-12-25 方案应用
全极响应+宽压适配:MT855X系列霍尔开关,工业级传感器

When the pulse of smart manufacturing beats on 24V industrial buses, when automotive electronics seek stability amid fluctuating voltages, and when IoT devices operate in harsh environments—these complex scenarios impose industrial-grade requirements on tiny sensing components; a stable signal often needs a “sensing heart” that can adapt to complex power environments. The MT855X series omnipolar Hall-effect switches, launched by MagnTek (now part of NOVOSENSE), are industrial-grade sensing components born for complex power environments. With features such as ultra-wide voltage compatibility and omnipolar magnetic response, they serve as a reliable sensing bridge connecting the physical world and digital systems.

1. Highly Integrated Architecture, Omnipolar Response

The MT855X series is manufactured using an advanced BCD (BJT+CMOS+DMOS) process. Its core design philosophy is compatibility and robustness, with a high level of integration inside a single chip:

  • Core integrated modules:Hall voltage generator, wide-voltage regulator, high-precision temperature compensation circuit, small-signal amplifier, dynamic offset cancellation system, Schmitt trigger, open-drain output;
  • Enhanced protection design:Output clamp diodes, reverse power supply protection (-16V), output current limiting protection (55mA), and ESD protection (HBM Class H2, CDM Class C3), greatly improving interference immunity and installation fault tolerance.

Its highly integrated design not only improves performance but also ensures the device's operating stability under severe voltage fluctuations.

Functional block diagram

Unlike traditional unipolar Hall-effect switches that respond to only a single magnetic pole, the MT855X is an omnipolar Hall-effect switch that responds to both N and S poles:

  • Trigger logic:When the magnetic field strength is greater than the operating point (BOP), the output is on (low level); when the magnetic field strength is less than the release point (BRP), the output is off (high level);
  • Core value:For engineers and manufacturers, there is no need to design a magnetic pole positioning structure, and end production does not need to distinguish magnetic pole direction, greatly simplifying the installation and design process; for end users, no matter which magnetic pole is used to touch it, the device can accurately identify and respond, greatly improving the user experience.

II. Wide Voltage and Wide Temperature, Industrial-Grade Components

1. Ultra-Wide Voltage Compatibility

In industrial and automotive electronics, an ideal DC power supply does not exist. Systems often face severe voltage fluctuations and noise interference caused by load transients, engine startup, inductive load kickback, and similar events. Traditional sensors in such environments are highly prone to false triggering or failure, becoming the starting point of a system failure chain. The MT855X series, however, features ultra-wide voltage compatibility and effectively addresses real-world pain points:

  • Operating voltage range: 3.0 V to 24 V DC, directly compatible with 3.3 V/5 V MCU systems, 12 V automotive power supplies, and 24 V industrial buses, without the need for an additional voltage regulator circuit;
  • Absolute maximum voltage ratings: +30 V forward maximum and -16 V reverse protection voltage, capable of withstanding common fault scenarios such as load transients, inductive load kickback, and reverse power connection;
  • Voltage regulation architecture advantages: an integrated high-voltage regulator module provides clean power to internal precision circuits and suppresses false triggering caused by voltage noise.

The ultra-wide voltage compatibility enables the MT855X series to cover multiple markets: engineers need only one model, and the design can operate stably in 3.3 V or 5 V microcontroller systems and also connect directly to the sensing nodes of 24 V PLC (programmable logic controller) digital input modules. This simplifies bill of materials management and improves the reusability and reliability of cross-platform designs.

2. Wide Temperature Operating Capability

True industrial-grade components must withstand the dual test of time and environment. The MT855X series not only offers ultra-wide voltage compatibility, but also has a wide operating temperature range from -40°C to 125°C: from outdoor equipment in northern winters, to high-temperature environments inside automotive engine compartments, or heat-generating areas near industrial motors, the MT855X can ensure the stability of its magnetic switch parameters. In addition, its built-in high-precision temperature compensation circuit can correct in real time the impact of temperature drift on Hall element sensitivity, ensuring stable trigger thresholds across the full temperature range.

III. Real-Time Response, Flexible Output

1. High-Speed Response: Suitable for Dynamic Detection Scenarios

In high-speed rotation detection or rapid reciprocating motion monitoring, sensor response speed is critical. The MT855X series has a sampling frequency of up to 25 kHz, meaning it can perform more than 20,000 magnetic field state detections and judgments per second, with extremely low latency.

Therefore, it is very suitable for applications such as speed measurement of brushless DC (BLDC) motors, high-speed position feedback of cylinder pistons, and synchronous positioning in printers or textile machinery. It can accurately capture every change in the magnetic signal, providing timely and accurate feedback for closed-loop control systems.

2. Open-Drain Output: Flexibility in Circuit Design

The MT855X uses an open-drain output structure. This design allows users to easily pull the output level up to 3.3V, 5V, 12V, or even 24V through an external pull-up resistor, enabling direct interfacing with controllers of different voltage levels in the system and providing great connection flexibility. At the same time, open-drain output also facilitates the wired-AND function of multiple sensors, simplifying the circuit design for aggregating multi-node status.

Key Parameter Table (Using MT8552 as an Example)

Product Model MT8552
Sampling Frequency (Hz) 25k
Operating Voltage (V) 3.0~24
Power Consumption 1.0mA
Operating Temperature (°C) -40~125
Operating Point (Gs) ±80
Release Point (Gs) ±60
Output Type Open-drain output
Package SOT-23;Flat TO-92

IV. Multiple Options to Meet Diverse Needs

The MT855X series offers multiple model options, including different package types and sensitivities, to meet different design and production requirements.

Model MT8551 MT8552 MT8553
Operating point ±32Gs ±80Gs ±60Gs
Release point ±27Gs ±60Gs ±45Gs
Suitable applications Weak magnetic field scenarios (micro sensors, TWS earbud charging cases, etc.) Medium-to-strong magnetic field scenarios (industrial valves, automotive door locks, etc.) General-purpose scenarios (smart meters, security sensors, etc.)

Users can select the appropriate model based on the magnetic field strength of the actual application, avoiding excessive or insufficient performance.

At the same time, the MT855X series also offers customers different packages to address different application scenarios: the SOT-23-3L package is very small and is suitable for space-constrained applications such as TWS earbud charging cases and micro sensor nodes; it also provides a flat TO-92 for through-hole mounting, suitable for scenarios such as industrial valves, home appliance control panels, and upgrades of legacy equipment. In addition, all packages in the MT855X series comply with RoHS standards and align with environmental protection principles.

Package View

V. Application Scenarios

1. Industrial Automation and Motor Control

In 24V bus systems or motor drive circuits, voltage noise and fluctuations are common. The MT855X's withstand voltage of up to 24V and wide-voltage operating capability allow it to connect directly to the system without an additional voltage regulation circuit. At the same time, its 25kHz high sampling frequency and stable magnetic switch characteristics make it suitable for motor speed detection, cylinder piston position sensing, or stroke limit switches, ensuring real-time and precise control.

2. Automotive Electronics Applications

Modern automotive power networks are complex. From the battery's 12V to the momentary high voltage that may occur during load dump, the voltage adaptability requirements for components are extremely high. The MT855X series fully meets these needs and can be used in non-contact switch scenarios such as detecting door lock status, shift lever position, and brake pedal position. Its omnipolar feature simplifies magnet installation because there is no need to distinguish between north and south poles, improving assembly efficiency and reliability.

3. Position Detection for General Equipment

Whether for outdoor equipment, home appliances, or instruments that require long-term stable operation, the operating ambient temperature may vary greatly. The MT855X series supports an operating temperature range of -40°C to 125°C and has a built-in temperature compensation circuit, ensuring the stability of magnetic sensing parameters under extreme high and low temperatures. Combined with its omnipolar characteristic and multiple model options, it can deliver excellent performance in applications such as smart water meters, gas meters, and outdoor security sensors, and can also be used in other general equipment on the market to enhance the user experience.

VI. Conclusion

In an engineering world full of voltage fluctuations, temperature changes, and installation variables, the MT855X series omnipolar Hall-effect switches provide rare "certainty"—solving power supply challenges with 3.0–24V wide voltage, eliminating installation concerns with omnipolar response, resisting environmental erosion with an industrial-grade core, and keeping pace with equipment through high-speed response.

The MT855X series not only meets the diverse needs of consumer, industrial, and automotive grades, but also features "less design, fewer failures, and high reuse," making it an ideal choice for engineers to improve product reliability and shorten R&D cycles. In the wave of intelligent upgrades, with solid performance, it is injecting stable and reliable sensing power into various devices. For more information about the MT855X series omnipolar Hall-effect switches or to request samples, contact: sales@chiplinkstech.com (email); WeChat official account: Zhilian Micro - Motor Control Chips, which can provide part selection services and technical support. We look forward to working with you.

WeChat ID

附样品申请二维码

Attach Sample Request

微信公众号二维码

WeChat Official Account

← Back to Solutions