0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Using TRINAMIC Smart Microsystems to Develop Motor Drivers Is Your Best Choice

Typically, design engineers either use motion control components as complete standalone units or build them themselves. However, designing motor drivers and motion control components from scratch requires detailed application knowledge of working with motors. It usually requires experience across a range of technologies, such as motor control loops, reading position sensors, and connecting them to various buses and communication interfaces.

2021-03-23 Solution Applications
使用TRINAMIC智能微系统开发电动机驱动器是您的最佳选择

Typically, design engineers either use motion control components as complete standalone units or build them themselves. However, designing motor drivers and motion control components from scratch requires detailed application knowledge of working with motors. It usually requires experience across a range of technologies, such as motor control loops, reading position sensors, and connecting them to various buses and communication interfaces. Because the core competencies of equipment manufacturers and system integrators that integrate motor drivers into their products are usually at a higher level of abstraction, the decision to build products themselves may divert the company's focus and energy away from its core R&D tasks. GermanyTRINAMICAlgorithms integrated inside the chip greatly reduce cost and development time.

Another consideration is to purchase motor drivers that are standalone hardware and software building blocks that can be integrated into products without requiring detailed knowledge of motor control. This article will compare the trade-offs of integrating motor drivers into motion control applications—whether these drivers are complete purchased units or separate building blocks rather than built in-house. It will analyze the different types of architectures and functions of purchased drivers and building blocks, and why they are so important.

1.Why Build Your Own? Advantages of In-House Servo Driver Development

A company may decide to build its own servo drivers for several reasons. Most of these reflect the complexity of each motor driver design having to meet a specific application, as well as the limitations of many existing off-the-shelf driver solutions.TMCThe C160 is powerful and covers all of the following functions while addressing their associated issues.

Design engineers typically have a very specific list of requirements for motor drivers in an application, including size, cost, functionality, performance, and power. Finding a commercial device that matches almost everything on the list can be difficult. Commercial products may be unsuitable because of physical dimensions, form factor, or issues related to mechanical integration. Or they may not meet the required technical specifications, such as voltage and power levels.

Even if a design engineer does find the right product, it may not be available when needed to meet a specific production window, or its price may not meet the product's target cost. Typically, they must trade off some features and specifications to obtain all the required options.

Developing a servo driver internally typically means that design engineers can create a device that meets all their specifications. Other reasons include the ability to redesign older hardware to refresh a product, and the desire for greater independence from external suppliers to achieve better product lifecycle management. The main reason for build-versus-buy is that the company wants to use its own motion planning, tilt, or positioning functions. For example, a product may require an extremely fast and easily synchronized interface, such as a step/direction interface in a multi-axis motion control device. If that interface is not available in commercial devices, building one's own device is often the only option.

Converting digital data into physical motion can be extremely difficult. If commercial motor drivers do not support critical interfaces or motion modes, additional software layers may be required. Such translation functions take time to develop and integrate. Worse, the extra communication layers introduce latency, which can degrade on-site control system performance and make engineering design during product development more complex. Whether the interface is simple (e.g., SPI (Serial Peripheral Interface) or UART) or more complex (e.g., CAN (Controller Area Network) or RS-485), engineers should first use a demonstration device or evaluation kit before using it. Estimate integration time.

II.Main Development Tasks and Issues for Motor Drivers

Companies that develop their own motor drivers internally must complete a long list of tasks that consume substantial development time and come with drawbacks.

First, engineers must make a selection from hundreds of available microprocessors. In addition to the correct package, pin selection, voltage levels, and many other features, it must also be inexpensive enough and have the minimum computing capability required by the application. The sheer number of choices alone makes this a daunting task. In addition, because new versions are released every two years by a given vendor, this may force companies to shorten the development cycle for industrial products to a shorter time than they would like.

Next, engineers must select and implement motor control algorithms, which requires motor and motion control specialists. This not only adds R&D staff but also makes such specialists generally hard to find, causing considerable trouble for the human resources department, Germany.TRINAMICAs a precision motion control expert, it has provided many customers with convenience in motion control.

Engineers must select components and create the electronic circuits for the power stage, including gate drivers and MOSFETs. They must pay attention to mechanical integration and select the correct connectors and power supply. They must also design the mandatory PCB (printed circuit board) schematic and layout, including designing current measurement and additional analog circuits.

After overcoming these obstacles, R&D must ensure that the design complies with specific standards or certifications, such as the safety requirements for medical devices. They may also need to ensure product compatibility with older equipment, which can mean that the availability of older parts is a major concern.

In addition to these routine tasks, engineers must also select one or more sensors for motor control and interface them with the motor driver. They must also choose a communication interface (such as EtherCAT) to the command-level controller (such as a PLC (programmable logic controller) or industrial PC).

Figure 2: Development and decision-making tasks that design engineers must consider when designing a motor driver.

Developing servo drives in-house usually means engineers can create a device that meets all their specifications. Other reasons include the ability to redesign older hardware to refurbish products, and the desire to be more independent of external suppliers for better product lifecycle management.

The Advantages of Purchasing Highly Integrated MicrosystemsWhat is it?

During the specification of new motor drive solutions, design engineers have many different options. Modern microsystems can be used to consolidate motor control and interface functions into easy-to-use building blocks. They come in several forms: preconfigured microcontrollers that implement motor control functions in software; multicore microcontrollers with motor and motion control functions; and other solutions that integrate bus system drivers and corresponding software stacks.

All these solutions stand in sharp contrast to complete drive solutions, which also integrate the power stage and measurement circuitry in a complete module. These complete drive solutions are the most flexible solutions and have lower development costs, because design engineers only need to integrate them into the system. In addition, they often include unnecessary functions for which you still have to pay. Although developing motor drives in-house often has higher development costs, from a manufacturing cost perspective it is usually more efficient. This is because tooling costs are generally lower, and the main additional cost is prototyping, which is usually counted as development cost.

Highly integrated microsystems offer a balanced approach between build and buy. They integrate not only motor and motion control functions but also command-level interfaces such as CAN or EtherCAT, as well as parts of the power stage, such as gate drivers. With these systems, engineers do not need to design these critical functions while still maintaining the required flexibility. These solutions also speed up the design process by using evaluation kits and standard modules and by leveraging standard APIs (application programming interfaces) that are carefully developed by motion control experts and easy to implement. Hardware design engineers still have the flexibility to match the power stage to their requirements, thereby adjusting the drive's form factor and dimensions.

Conclusion

When developing motor drives under typical cost and time constraints, design engineers can leverage highly integrated motion control microsystemsTRINAMICthat offer exactly these advantages. These not only provide access to advanced motion control expertise and functions that engineers may not possess, but also enable fast, streamlined, and easy designs.

← Back to Solutions