0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Control Solution for Automated Ophthalmic Testing Equipment

Compared with Visionix's standard component solution, developing a custom circuit board for ophthalmic devices offers several advantages: it can seamlessly integrate the functions of two circuit boards onto a single board. Traditional eye examinations are very time-consuming and rely on the patient's subjective judgment to determine whether vision improves after using lenses. Israeli company Visioni […]

2022-05-27 方案应用
眼科自动检测设备的控制解决方案

Compared with Visionix's standard component solution, developing a custom circuit board for ophthalmic devices offers several advantages, enabling the functions of two circuit boards to be seamlessly integrated onto a single board.

Traditional eye examinations are very time-consuming and rely on patients' subjective judgment to determine whether vision improves after using lenses. The L80+ automatic diagnostic device designed by Israeli company Visionix in 2008 overcame this challenge, providing accurate and objective data within seconds after measuring the patient's ocular reflex responses.

The device stores evaluation results from thousands of doctors and uses them as diagnostic models; therefore, when assessing objective results, its extensive experience and outstanding accuracy far exceed what a single doctor can achieve. Although medical knowledge is still needed to determine the treatment plan, this diagnostic device can provide a reliable basis for consultation and treatment plans. Thus, the Visionix L80+ can be used both in medical practice and in optical shops.

Because the device uses measurement data for correction, it has very high accuracy. To ensure this level of accuracy, Visionix uses stepper motors and brushless DC motors to control the movement of the chin rest and laser. All six motor axes used in the device are controlled through the same control module, namely the custom TMCM-VI-802 module.

眼科自动检测设备

Single custom circuit board integrates all functions

All components required to control five stepper motors and one BLDC motor are integrated on a single PCB. Two of the stepper motor axes are low-current axes for driving motors with phase currents up to 1 A, and two other axes can drive motors with phase currents up to 3 A. The board is based on building blocks from the standard solution and is a typical example of improving cost-effectiveness with custom motor control and motion control solutions; optimizing a standard solution can effectively save time, reduce costs, and lower risks.

The challenge faced

Developing ophthalmic equipment requires five stepper motors and one BLDC motor axis.The device prototype initially used Trinamic's standard solutions—the TMCM-610 (capable of driving up to six stepper motors) and the TMCM-170 BLDC module (a circular stack module that can be mounted directly on the motor). However, because there was no need to mount the BLDC driver module on the motor, Visionix asked Trinamic to optimize the prototype from a production standpoint and integrate control of all axes onto a single circuit board.

During development, Trinamic worked closely with Visionix to meet customer requirements, ensuring that the custom solution for the customer was developed in parallel with standard products for low-volume production. This is a common approach: first use standard products to build prototypes and carry out low-volume production, then move to mass production with an optimized, cost-effective solution.

Trinamic开发板

[Left: Trinamic TMCM-170], [Center: Trinamic TMCM-610], [Right: TMCM-VI-802 combines the functions of TMCM-170 and TMCM-610]

Experts in Integration

What is special about the custom TMCM-VI-802 is that it integrates stepper motor and BLDC motor control on a single board. Each motor type has its own processor, and all connections and wiring need to be made only once, reducing cost, workload, and the possibility of errors. In addition, the board shape can be tailored to the specific application to address the limited space faced by Visionix engineers.

Most importantly, Trinamic's engineering team was responsible for the motion control components used in the application, while the customer's own engineering team could focus on the core of the L80+ and optimize the application layer and software. This is why the L80+ became a breakthrough device with outstanding performance, helping to simplify ophthalmic examinations while improving examination accuracy.

Accelerate innovation and stay one step ahead

These advantages can not only drive the development of ophthalmic devices, but also help engineering teams overcome the many growing constraints caused by the Fourth Industrial Revolution. Klaus Schwab said, 'The current pace of breakthroughs is unprecedented.' Therefore, to always stay one step ahead in competition, one must commit to rapid innovation. Just as Visionix did, using Trinamic's expertise within tight development cycles to solve complex motion control challenges.

This not only shortens development time and reduces costs and risks, but also increases the product's profitability over its lifecycle. Especially in the medical, robotics, and aerospace fields, being first to market can make a product known to customers earlier, thereby increasing customer loyalty. Of course, this also means that customized solutions must be reliable and complete. Therefore, components such as low-current axis and high-current axis or BLDC control are not products that Trinamic recently developed.

On the contrary, the individual modules that make up the solution are all mature products proven over many designs and applications. Therefore, after adapting the software to the new layout, the engineering team can create a customized solution that meets customer requirements in the shortest possible time.

← Back to Solutions