0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

TMC5160 High-Voltage Applications

In motor driver IC applications, all chips operate within a certain voltage range. Some battery applications have low power, while others use higher and unstable DC supply voltages. If the supply voltage is below the chip's specified voltage, it will not operate; if it exceeds the chip's rated voltage or peak value, the chip will either implement protection or be damaged. TMC's stepper motor driver chips […]

2022-10-21 方案应用
TMC5160的高电压应用

In motor driver IC applications, all chip voltages operate within a certain range. Some battery applications have low power, while some DC supply voltages are higher and unstable. If the supply voltage is below the chip's specified voltage, it will not operate; if it exceeds the chip's rated voltage or exceeds the peak value, the chip will either implement protection or burn out.

TMC's stepper motor driver chips provide motor and current detection functions and can also handle high-voltage startup.

The voltage range of the TMC5160A stepper motor driver is 8–60 V, making it very suitable for many automation industries, and the TMC5160 can also be used in high-voltage industrial applications. In addition, this highly integrated TMC5160 chip offers quite good performance with low heat generation.

For peak voltages above 60 V, an external gate driver IC can be used to boost the TMC5160 gate driver output.

The figure above shows an example circuit in which each half-bridge uses an external gate driver IC to boost the TMC5160 output capability. BBM control is still performed by the TMC5160. These ICs are 12 V devices, so the TMC5160 output signals can drive them directly. The BM pin needs to be close to ground to generate a ground-referenced high-side control signal. By connecting BM to the corresponding sense resistor, VS supply short-circuit protection can still respond to overcurrent conditions. Limit the short-circuit detection voltage drop to 0.5 V...0.8 V to avoid the high-side output reaching too high a level. High-side short-circuit protection must be disabled by setting CHOPCONF.diss2g because it cannot work in this circuit configuration. Keep the layout and all interconnections compact to avoid interference from parasitic effects. Also refer to the application notes of the selected gate driver IC.

The TMC5160 has complete motion control functions and external MOSFETs, and supports motor currents up to 20 A. This multifunctional integration optimizes chip performance, enables miniaturization and high efficiency, and saves related system costs.

← Back to Solutions