In switch-type Hall-effect sensor selection, unipolar, omnipolar, and latching are the three mainstream technology routes, each suited to different engineering needs: unipolar offers strong interference immunity and is suitable for harsh industrial and automotive environments; latching provides state memory and is the first choice for motor speed measurement and magnetic encoding; omnipolar requires no distinction of magnet polarity, can lower the assembly process threshold, and is especially suitable for high-volume consumer and home appliance scenarios.
The MT857X series (formerly MagnTek, now NOVOSENSE) is an omnipolar Hall switch positioned for the general market. Built with BCD process, it integrates dynamic offset cancellation, built-in pull-up resistors, and a full set of protection circuits, simplifying system design and mass-production assembly while maintaining stable detection.

I. Core Architecture: Simplifying Design and Mass Production from the Chip Level
The MT857X integrates the complete magnetic field sensing, signal processing, and protection chain in a single chip. Its core design is centered on three goals: lowering assembly barriers, reducing external components, and ensuring full-temperature stability.
1. Omnipolar Sensing: Eliminating Polarity Assembly Pain Points
Unlike unipolar solutions that respond only to a single specified magnetic pole, the MT857X is omnipolar—it detects the magnetic field component perpendicular to the chip marking surface. Whether the field is from an N pole or an S pole, as long as the absolute field strength exceeds the operating point threshold, the output toggles; when the field weakens below the release point, the output automatically returns to high.
The most direct value of the omnipolar type is that it avoids the process risk of "functional failure caused by incorrect magnet polarity installation." In automated assembly or large-scale manual assembly scenarios, there is no need to distinguish the front and back of the magnet, nor to strictly align it to a specified magnetic pole direction, to achieve stable triggering. This improves assembly efficiency and reduces defect rates in mass production, making it suitable for high-volume products such as water meters and household appliance door covers.
2. Dynamic offset cancellation: stable thresholds across the full temperature range
The raw signal of a Hall element is weak. Temperature changes and package stress introduce DC offset, ultimately causing switching-point drift and leading to problems such as false triggering at low temperatures and missed triggering at high temperatures.
The MT857X incorporates an internal dynamic offset cancellation system. Using 400 kHz chopper stabilization technology, it continuously samples and automatically cancels the offset voltage, keeping residual offset at a low level. Together with the built-in temperature compensation circuit, the chip's magnetic switching threshold varies smoothly across the full operating temperature range of -40°C to 125°C, and detection distance consistency is excellent under different environments, with no need for additional board-level temperature compensation.
3. High integration: integrating peripheral functions into the chip
Traditional Hall switches usually require external components such as pull-up resistors, reverse-connection protection diodes, and output filters. Each additional component adds a potential failure point and consumes more PCB space and material cost.
The MT857X integrates many system-level functions inside the chip:
① Built-in 10 kΩ pull-up resistor, eliminating the need for additional external components and directly outputting the level;
② Integrated -16V reverse power supply protection, so reversing the positive and negative power supply terminals will not damage the chip;
③ The output has built-in clamping diodes and current-limiting protection, and can withstand output short-circuit conditions.
These designs not only simplify the BOM list but also reduce system risks caused by external component failures, making the overall solution simpler and more reliable.
Simplified Block Diagram
II. Parameter Interpretation: Corresponding Practical Engineering Value
The MT857X parameter design targets the practical requirements of general-purpose scenarios; behind the datasheet specifications are clear engineering benefits:
1. Wide operating voltage: 3.0 V to 24 V
It covers mainstream voltage platforms from 3.3 V low-voltage logic devices to 24 V industrial power supplies. A single model can be used across consumer electronics, home appliances, industrial and other product types, reducing device selection and inventory costs and eliminating the need for additional level-shifting or step-down circuits.
2. Operating temperature range: -40°C to 125°C
It covers the vast majority of consumer and industrial room-temperature and medium-temperature scenarios. Whether in outdoor sensing equipment in winter or detection nodes near motors and heat-generating components, it can operate stably and is suitable for a wide range of scenarios.
3. 25 kHz sampling frequency and ≤1 μs response edge
The 25 kHz sampling frequency is sufficient to cover the requirements of most position detection and proximity switch applications, and can also reliably support medium- and low-speed rotation counting scenarios. Combined with rise/fall times of ≤1 μs, it ensures steep output signal edges. Even under operating conditions with long cables and relatively large parasitic capacitance, it can output clean, accurate square-wave signals, avoiding controller misjudgment caused by signal tailing and improving detection reliability in electromagnetically harsh environments.
4. 1 mA (typical) supply current, low power consumption
The MT857X series is positioned as a low-power Hall-effect switch, featuring a typical supply current of 1 mA and a 25 kHz sampling frequency. It controls operating current while meeting the response speed required for conventional position detection. Compared with some high-speed Hall-effect switches, the MT857X delivers sufficient performance in the vast majority of position detection and proximity switch scenarios, with lower power consumption. It offers significant advantages in battery-powered devices or devices with long-term power consumption considerations.
5. -16 V Reverse Supply Protection
During assembly, debugging, and field wiring, reverse power connection is a frequently occurring human error. The MT857X integrates reverse protection inside the chip. Compared with an external series diode, the integrated protection eliminates the diode forward voltage drop (VF), so the chip can still obtain sufficient drive voltage under low-voltage supply, giving it an advantage in low-voltage systems. The integrated -16 V reverse protection not only avoids the power consumption and voltage loss caused by the external diode voltage drop, but also improves debugging fault tolerance.
6. Output Short-Circuit Protection (Typical 50 mA)
When the output is accidentally shorted to the supply, the chip automatically limits the output current, preventing damage to the chip caused by wiring errors or load faults and improving reliability during device debugging and long-term operation.
7. HBM H2-Level, CDM C3-Level ESD Protection
HBM H2 level is higher than the ESD tolerance level of ordinary consumer-grade chips, making it less susceptible to ESD damage during manual soldering and end-product plugging/unplugging. CDM Class C3 provides protection for automated equipment discharge scenarios in the SMT placement process, further reducing the defective board rate in mass production and after-sales repair risk.
III. Models and Selection
The MT857X series includes three sub-models. The core difference is the magnetic sensitivity threshold (the smaller the absolute values of BOP and BRP, the higher the chip sensitivity). Two package options are also available, allowing flexible selection based on detection distance, magnet strength, and mounting method.
| Model | Typical operating point (BOP) | Typical release point (BRP) | Positioning and Application Scenarios |
| MT8571 | ±32GS | ±27GS | High-sensitivity version, suitable for scenarios with weak magnets (such as ferrite magnets), large air gaps, and long detection distances (through thicker housings) |
| MT8573 | ±60GS | ±45GS | Balanced version, combining detection distance and interference immunity |
| MT8572 | ±80GS | ±60GS | High-threshold version, with strong immunity to stray magnetic field interference, suitable for compact installation scenarios near motors and electromagnetic equipment or when using strong NdFeB magnets |
Package Selection
- SOT-23 surface-mount package (suffix AT): Compact size, suitable for board-level integration scenarios with limited PCB space;
- Flat TO-92 through-hole package (suffix A): Leads can be bent, the magnetic sensing surface orientation is fixed, suitable for probe-style installation and industrial sensing nodes with long wiring harness connections.

Package Pin View
IV. Typical Application Scenarios
The omnipolar characteristics and high integration of the MT857X enable it to deliver advantages in multiple fields:
1. Home Appliances
Refrigerator door switches, washing machine door/lid status detection, range hood lift panel limit detection, and in-position detection for various small appliances. The omnipolar design meets the needs of large-scale automated assembly in the home appliance industry; the wide-voltage design allows direct connection to appliance power supplies, and high integration makes the peripheral circuit simple and reliable.
2. Industrial Automation
End-position detection for small pneumatic cylinders, equipment stroke limit switches, and material position sensing on production lines. The wide-temperature characteristics adapt to industrial cabinet environments; -16 V reverse-polarity protection and short-circuit protection reduce the risk of damage during on-site wiring and commissioning, and stable magnetic thresholds ensure detection consistency over long-term operation.
3. Consumer and Smart Sensing
Magnetic door/window sensors, smart door lock status detection, sleep/wake-up for flip/slide-cover devices, and counting sensing for water and gas meters. Low power consumption extends the battery life of battery-powered devices, the small package can be integrated into compact sensor modules, and the omnipolar design also reduces process requirements for end-product assembly.
V. Conclusion
The MT857X series omnipolar Hall-effect switches feature omnipolar sensing that lowers assembly barriers, high integration that simplifies system design, and stable temperature-drift characteristics that ensure reliability under all operating conditions. For general-purpose position detection in high-volume mass production, they offer a solution with few external components, low assembly effort, and a light BOM.
In today's push for both cost reduction and efficiency gains and intelligentization, the MT857X—with its highly integrated peripheral circuitry and simplified omnipolar design—can be an ideal replacement for traditional micro switches and reed switches. Engineers can use simpler circuits to achieve more stable position detection.
For more information about the MT857X series products or to request samples, please contact: sales@chiplinkstech.com; 13924675549, Mr. Chen.

Sample Request Attached

WeChat Official Account