0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Servo and Motion Control - What Do Servo Encoder Accuracy and Resolution Affect?

“Accuracy” describes how accurate a physical quantity is and reflects the error between the measured value and the true value; “resolution” describes scale divisions and reflects the smallest change that can be read during value reading. A simple analogy: a common 10 cm ruler with 100 graduations can read a minimum effective value of 1 mm […]

2019-03-01 Frequently Asked Questions
No cover image

““Accuracy” is used to describe the accuracy of a physical quantity; it reflects the error between the measured value and the true value, while “Resolution” is used to describe the division of scales; it reflects the smallest change value that can be read during value reading.

Simple analogy: a common ruler with a range of 10 cm has 100 graduations and can read a minimum effective value of 1 mm. Then we say the ruler's resolution is 1 mm; it can only be read as 1, 2, 3, 4 ... 100; however, its actual accuracy is unknown, because for a 2 mm reading from this ruler, we do not know the error between it and the true absolute 2 mm. If we heat it over a fire, stretch it by some length, and then examine it again, we can easily find that it still has 100 graduations, so its “resolution” is still 1 mm, the same as before! However, its accuracy has clearly changed.

For an encoder,“Resolution” is not only related to the number of grating lines; it can also change due to electrical signal factors.It is adjustable and controllable, and it can change with signal subdivision. The higher the subdivision factor, the smaller the resolution; however, the higher the subdivision factor, the greater the introduced and amplified error.

Accuracy, however, is more related to mechanical aspects,Once a product is manufactured, its accuracy is basically fixed(some high-accuracy products can compensate the signal, etc., to improve accuracy). This value is obtained through testing and is closely related to the product's overall performance, such as workmanship and materials. It is difficult for us to calculate a specific value as the basis for accuracy; in most cases, the quality of accuracy can only be judged during use.

For example, for a 13-bit encoder, the number of absolute positions on its code disc is 8192; therefore, the calculated resolution is 158 arcseconds. That is, when reading values, the jump between values is required to be 158 arcseconds. If the first value to be read is 0, the second value to be read must be greater than 158. If it is to be less than 158, we need to choose a smaller resolution. When reading the value 158, due to the existence of error, it is impossible to obtain exactly 158 arcseconds; the error between the 158 arcseconds read by the encoder and the absolutely true 158 arcseconds depends on the accuracy. Therefore, accuracy is discussed on the basis of resolution.

However, it is not that the smaller the resolution obtained through subdivision, the better; because subdivision introduces and amplifies errors, excessive subdivision will make it impossible to guarantee accuracy!How many times of subdivision are required and how many times can be achieved must be based on the premise of ensuring accuracy., because precision is invisible before use, high-ratio subdivision is irresponsible. The higher the code disc quality and the better the grating lines, the better the signal quality and the smaller the error generated after subdivision. This is affected by the overall performance of an encoder, which is also one reason why encoders of different brands and price points exist under the same specifications.


For example, if the values we need to read are 1, 2, 4, 7, and 8, we must choose a resolution of at least 1 unit; choosing a resolution of 2 units is obviously not acceptable, because if we read the value 1, then 2 cannot be read. On the basis of choosing a resolution of 1 unit, the error between the 1 we read and the true absolute 1 is the accuracy. The CNC system on a machine tool has a resolution setting for linear gratings; if the interval of values to be read is smaller than the resolution, the machine tool may jitter or make errors.

Forabsolute encoders with incremental signals can accurately keep the serially transmitted absolute position value synchronized with the incremental value, the absolute value corresponds exactly to one incremental signal, and the position value must be within one sine period of an incremental signal.

For example, for a 13-bit absolute encoder with a 512-line incremental signal, the absolute position interval is 158 seconds. Reading a position between two code disc positions is not appropriate. However, we can subdivide its 1 Vpp incremental signal, for example by 100 times; this is equivalent to introducing several subdivided positions between two absolute positions. On the basis of the absolute position value, by counting the subdivided incremental pulses, we can read a position value between two absolute positions. For example, with a 512-line signal subdivided 100 times, if absolute position 1 has the value 0 and absolute position 2 has the value 158, then to read a position between these two positions, one additional pulse on top of position 1 (value 0) gives 25, and two pulses give 25×2=50...

However, absolute encoders with incremental signals do not themselves provide subdivision; this requires the user to subdivide the incremental signal independently.

← Back to News