Trinamic's newly launched TMC2240/TMC2210/TMC5240 high-performance motor driver ICs were introduced to the market at the end of 2022. How do they perform? What more outstanding advantages do they offer over competing products?

TMC5240 --- upgraded version of TMC5130
TMC2240 --- upgraded version of TMC2209/2208/2130
TMC2210 --- full hardware mode; no register configuration or communication configuration required; in standalone mode, an upgraded version of TMC2209/TMC22C08/TMC2130
1. New Product Performance Comparison
1. Chopper Mode Switching Effect Test
TMC2209, TMC2208, and TMC5130 have two chopper modes: quiet and high-speed. The maximum speed in quiet chopper mode generally does not exceed 300 rpm, which limits many high-speed applications and requires switching to high-speed mode. However, at the speed point where the two chopper modes switch, motor jerking occurs.
Summary: The video demonstrates the motor jerking that occurs at the chopper mode switching point in TMC2209, TMC2208, and TMC5130. The momentary sound in the video comes from the switching point between the two chopper modes. The new-generation TMC2240, TMC2210, and TMC5240 maintain a stable motor state at the mode switching point, with no abnormal behavior, solving the jerking problem at the chopper mode switching point and extending quiet mode to higher speeds.
2. Maximum speed comparison between the new-generation TMC2240/TMC2210/TMC5240 and the previous-generation TMC2209/TMC2208/TMC5130
3. Temperature rise comparison between TMC2209 and TMC2240/TMC2210

The initial temperature of TMC2209 was 17°C, and after one hour of operation it was 40°C. The measured initial temperature of TMC2240 was 13.8°C, and after one hour of operation it was 31°C. The all-new upgraded TMC2240/TMC2210 generates less heat.
Summary: The newly upgraded TMC2240/TMC2210/TMC5240 offer many advantages, including higher power, lower heat generation, higher speed, higher integration, and higher current control accuracy.
Comparison of Some Parameters
1. The new-generation product integrates a current-sensing resistor, and the MOSFET on-resistance is lower.
2. The maximum voltage is 36 V, the RMS current is 2.1 A. Integrated current sensing keeps current accuracy within 3%, reduces heat generation to less than 50% of the previous generation, eliminates the need for a heat sink, and provides lower current attenuation at high speed, ensuring higher-speed control. It saves 60% space compared with competing products.
3. The new-generation product features the latest control algorithm and improved outstanding analog and current-management performance, with overall performance superior to equivalent competing products on the market.
4. The silent chopping speed range is extended higher, solving the switching-point jitter problem and increasing power while reducing heat generation.
5. The new-generation driver chip can greatly increase 3D printing speed, save energy, run more smoothly without jitter at high speed, save PCB space, and eliminate the need for a heat sink.
This is the external circuit diagram of the new-generation product. By eliminating the current-sensing resistor, it improves current control accuracy while saving PCB space and reducing the difficulty of design and component selection.

Product Performance Comparison
Application Areas
| Application Areas | Improvements |
|---|---|
| Improvements | 1. Quiet, smooth, and jitter-free at high speed 2. Lower power consumption 3. Saves board space |
| Laboratory automation, in vitro diagnostic equipment | 1. High precision, low power consumption, and quiet operation 2. Low cost |
| 3D printing | 1. Significantly reduces noise 2. Reduces vibration and improves print quality 3. Increases printing speed 4. Sensorless homing 5. Overcurrent protection |
| Textile machinery/sewing machines | 1. Sensorless load detection 2. Reduced noise and vibration 3. Improved efficiency |