0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

TRINAMIC Stepper Demo Board — TMC5130

OFF ON StallGuard: (Sensorless Torque Detection Technology) Stepper motor sensorless torque detection; no need for home and limit sensors to detect load changes. CoolStep: (Energy-Saving Mode) Based on the StallGuard load value, it enables sensorless current to vary dynamically with load and adjust automatically, reducing motor heating by up to 75%, thereby saving energy. […]

2021-08-05 Frequently Asked Questions
TRINAMIC步进演示功能DEMO板—TMC5130

OFF

ON

StallGuard: (Sensorless Torque Detection Technology)

Stepper MotorSensorless torque detection; no need for home and limit sensors to detect changes in load magnitude.

CoolStep: (Energy-Saving Mode)

Based on the StallGuard load value, it enables sensorless current to vary dynamically with load and adjust automatically, reducing motor heating by up to 75%, thereby saving energy.

Diagram: red line (current value), blue line (load value)

StallGuard: (sensorless torque detection technology)

Reference Search: (Stall stop)

Find the home position without limit switches.

CoolStep: (energy-saving mode)

Using the StallGuard load value, it enables sensorless current to vary dynamically with load and adjust automatically, reducing motor heating by up to 75% and thereby saving energy.

OFF

ON

dcStep:(Step-loss prevention mode)

Automatically adjusts speed according to the load. When the load is high, the speed automatically decreases, increasing motor torque and preventing step loss.

OFF

ON

SPreadCycle:(High-speed vibration suppression mode)

The stepper motor runs smoothly at high speed without vibration.

TRINAMIC  StealthChop:(Silent chopping drive technology)

The larger the microstep, the smoother the motor movement and the higher the position control accuracy. In low-speed silent mode, the noise is below 10 dB at 300 RPM.

← Back to News