0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Motion Control Solutions

TRINAMIC's StealthChop™, SilentStepSticks, and evaluation boards work together to implement a complete motion control system. TRINAMIC's StealthChop is based on the voltage chopper principle and enables the smoothest stepper motor motion. Unlike other voltage-mode choppers […]

2018-12-18 New Product Information
运动控制解决方案

TRINAMIC's StealthChop™, SilentStepSticks, and evaluation boards work together to create a complete motion control system

运动控制解决方案TRINAMIC's StealthChop is based on the voltage chopper principle and enables the smoothest stepper motor motion. Unlike other voltage-mode choppers, StealthChop2™ (quiet chopper mode) requires no configuration. It automatically learns the optimal settings during the first movement after power-up and further optimizes them in subsequent movements. The initial startup sequence is sufficient for this learning process. The chip adjusts voltage modulation to minimize current ripple. StealthChop applications have achieved noise levels 10 dB or more below those of classic current control.

SilentStepStick is a stepper motor driver board for two-phase motors based on the TMC2100, TMC2130, TMC2160, or TMC2208. The driver board is compatible with StepStick and Pololu A4988. SilentStepSticks are plug-and-play driver boards that use the smartest stepper motor drivers on the market. Because they provide advanced TRINAMIC technologies such as StealthChop, MicroPlyer™ (microstep interpolator), and SpreadCycle™ (high-precision chopper algorithm), these small breakout boards set the benchmark for DIY 3D printers, milling machines, and pick-and-place machines.

In addition to the technologies standard on every SilentStepStick, each driver board has its own advantages. The SilentStepStick is equipped with an SPI configuration interface, CoolStep™ current control for energy savings, and StallGuard™ for sensorless load detection (sensorless stall detection and mechanical load measurement), eliminating the need for additional end stops. Because StealthChop technology is popular in 3D printing applications, the TMC2208 SilentStepStick was specifically designed as a drop-in replacement for existing 3D printer electronics. This component therefore eliminates the need for costly redesigns. By combining all the common features of the SilentStepStick SPI, this high-power stepper motor driver IC can drive motors with up to 1.2 A of motor current per coil.

The breakout board (BOB) is an open-source board for TRINAMIC chips that converts digital information into physical motion. A single easy-to-use electrical component meets all the requirements for rapid prototyping, so users no longer need to worry about building a final design or soldering SMD components before testing a prototype. The BOB can be used on a breadboard or with flying leads because all sensitive signals (such as sense lines) are routed through the breakout board itself.

Breakout boards are suitable for anyone who needs to rapidly develop a physical prototype to obtain a minimum viable product (MVP). A breakout board has everything needed to use the component, such as sense resistors, capacitor buffers, and power MOSFETs or Ethernet connectors. TRINAMIC's Technology Access Package (TTAP) provides example code and APIs for each chip on the breakout board. The comprehensive technical support information in TTAP and the TRINAMIC motor and motion control IC tools not only simplify (physical) design-in and startup but also accelerate firmware development. All of this can be transferred to a microcontroller, or the provided Arduino examples can be used, thereby minimizing the time required for prototyping. All TRINAMIC breakout boards come with licensed open-source hardware.

StealthChop Feature

  • Lowest-power coil current
  • Noise reduced by 10 dB or more compared with classic current control
  • Up to 256 microsteps per full step, achieving extremely smooth motion
  • Current waveform as close to analog as possible

 SilentStepSticks Feature

  • Open-source driver board
  • Quiet, smooth motor control with up to 256 microsteps per full step
  • Integrated TRINAMIC technology
  • Easy to program

 StealthChop applications

  • Wired CCTV
  • Security
  • Office automation
  • Antenna positioning
  • Battery-powered applications
  • Automated Teller Machines
  • POS and Laboratory Automation
  • Liquid Handling
  • Medical Pumps
  • Printers and Scanners

Related Models

TMC2100-LA-T IC STEPPER MOTOR DRIVER 36QFN
TMC2100-TA-T IC STEPPER MOTOR DRIVER 48TQFP
TMC2130-LA-T IC STEPPER MOTOR DVR SPI 36QFN
TMC2130-TA-T IC STEPPER MOTOR DRIVER 48TQFP
TMC2160-TA IC STEPPER MOTOR DRV SPI S/D
TMC2202-WA-T STEPPER MOTOR DRIVER
TMC2208-LA-T IC STEPPER MOTOR DRIVER 28QFN
TMC2224-LA-T IC STEPPER MOTOR DRIVER 28QFN
TMC5041-LA-T IC MOTOR CONTROLLER/DRIVER SMD
TMC5072-LA-T IC MOTOR CONTROLLER/DRIVER SMD
TMC5130A-TA-T IC MOTOR CTLR/DVR SPI 48QFP
TMC5160-TA STEPPER MOTOR CDRIVER
TMC5160-WA STEPPER MOTOR CDRIVER
← Back to News