0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Trinamic Releases 6-Axis Stepper Motor Driver Module TMCM-6214

Trinamic Releases 6-Axis Stepper Motor Driver Module TMCM-6214 April 15, 2019, Hamburg, Germany—TRINAMIC announces the launch of the TMCM-6214, a highly integrated module that can drive up to six motors. Thanks to three encoder inputs for incremental A/B/N encoders, it can […]

2019-05-14 New Product Information
No cover image

Trinamic Releases 6-Axis Stepper Motor Driver Module TMCM-6214

April 15, 2019, Hamburg, Germany—TRINAMIC announces the launch of the TMCM-6214, a highly integrated module that can drive up to six motors. Thanks to three encoder inputs for incremental A/B/N encoders, it can monitor three of the six motors during operation, making it ideal for multi-axis applications in laboratory and factory automation, life sciences, robotics, test and measurement, and applications involving the handling of valuable items and liquids.

Trinamic发布6轴步进电机驱动模块TMCM-6214

“By monitoring the motors, our customers can closely track the performance of their applications. Predictive maintenance makes these capabilities easy to achieve, which can significantly extend service life,” said Michael Randt, founder and CEO of Trinamic.

Trinamic发布6轴步进电机驱动模块TMCM-6214

The features of the TMCM-6214 mean engineers can add an extra layer of safety to their applications, ensuring optimal performance throughout an extended service life. In addition, features such as DcStep™ (load-dependent speed control) provide state-of-the-art motor and motion control, adding DC motor characteristics to stepper motors by delivering higher torque at lower speeds.

To improve ease of integration, the TMCM-6214 is available in TMCL™ and CANopen versions. CAN, RS485, RS232, or USB can be used for communication; there are a total of six general-purpose digital inputs, two analog inputs, and eight protected general-purpose outputs for diagnostics. It includes an integrated power switch and two hardware torque-off inputs.

Since all time-critical operations (such as ramp calculations) are performed on-board, communication traffic remains low. The device can be fully controlled remotely via feedback. The module's TMCL™ firmware can be updated through any serial interface. As an alternative to the TMCL version, the TMCM-6214 is also available with CANopen firmware. Both versions will be available through the May release.

Performance parameters

  • 6-axis two-phase stepper motor driver + controller, silent drive below 10 dB
  • Trapezoidal and six-point acceleration/deceleration profiles
  • 9... 30 V DC power supply
  • 1.9 A RMS drive current per axis
  • CAN (1 Mbit/s), RS485 (1 Mbit/s), RS232, USB (12 Mbit/s) communication
  • 3-axis A/B/N encoder inputs
  • Multi-channel Digital/Analog Input/Output

Market Applications

  • Laboratory Automation
  • Factory Automation
  • Medical Equipment
  • Semiconductor Equipment
  • Robotics
  • Test/Inspection Equipment
  • Life Sciences / In Vitro Diagnostics
  • Pipetting Equipment
← Back to News