0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

TRINAMIC Launches the TMC6200

On April 1, 2019, in Hamburg, Germany, TRINAMIC introduced the TMC6200. This chip is a new high-voltage gate driver that can sense motor current inline; using external MOSFETs, it can drive BLDC motors and PMSM servo motors up to 100 A. TMC6200 TMC6200 uses six external MOSFE […]

2019-04-04 New Product Information
Trinamic重磅推出TMC6200

On April 1, 2019, in Hamburg, Germany, TRINAMIC introduced the TMC6200.
This chip is a new high-voltage gate driver that can sense motor current inline and, using external MOSFETs, can drive BLDC motors and PMSM servo motors up to 100 A.

Trinamic重磅推出TMC6200
TMC6200

The TMC6200 uses six external MOSFETs and two or three sense resistors,
It integrates the voltage section of a complete high-voltage PMSM drive system at 12 V, 24 V, or 48 V, including an in-line programmable current-sense amplifier. It can drive a wide range of motors from watts to kilowatts. Software-controlled drive strength allows in-system EME optimization.
Safety features such as fast detection and overtemperature thresholds, together with an SPI interface for diagnostics, enable robust and reliable designs.
With the TMC6200, a minimal number of external components is required to build a rugged driver with full protection and diagnostics.

Trinamic重磅推出TMC6200
mark

Trinamic CEO Michael Randt said:
“Engineers encounter several constraints during the design process, among which time is the most important. The TMC6200 complements the servo controller building blocks based on TMC4671 hardware and provides programmable safety functions such as short-circuit detection and overtemperature thresholds, enabling robust and reliable designs using off-the-shelf building blocks.”

 

Flexible for multiple scenarios:

The TMC6200 can quickly adapt to new use cases and requirements, offering standalone operation and SPI-controlled operation.
Standalone operation:

Trinamic重磅推出TMC6200
mark

SPI-controlled operation:

Trinamic重磅推出TMC6200
mark

Functional parameters:

  • Three-phase motor, coil current up to 100 A (external MOSFETs)
  • Voltage range 8 … 60 V DC
  • Programmable gate drive: 0.5 A / 1 A / 1.5 A
  • Comprehensive protection and diagnostics via SPI interface
  • 3 floating sense amplifiers with programmable gain (5, 10, 20)
  • Gate Off Drive with 1 Ω (LS) / 1.3 Ω (HS) safe hold-off resistors
  • SPI and independent operation
  • Charge pump for 100% duty cycle operation
  • Optional break-before-make (BBM) logic for single-wire control
  • Programmable short-circuit and overload current thresholds with retry
  • Programmable control interface with 3-wire or 6-wire drivers
  • Comprehensive protection and diagnostics
  • Compact 9x9 mm TQFP48 package
  • Dual-pin spacing for safe operation at high voltage

Applications:

It can drive motors ranging from watts to kilowatts and is ideal for industrial applications:

  • Industrial drives
  • Factory Automation
  • Laboratory Automation
  • Robotics
  • CNC Machine Tools
  • Textile Machinery
  • Water Pumps
  • Surveillance Cameras
  • Home Automation
  • Printer
← Back to News