0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

TMC5161 cDriver™ IC

Trinamic's fully integrated TMC5161 cDriver IC features an integrated motor controller and driver for 2-phase stepper motors. Trinamic Motion Control's TMC5161 cDriver solution is an easy-to-use building block with […]

2019-01-10 New Product Information
TMC5161 cDriver™ IC

Trinamic's fully integrated TMC5161 cDriver IC features an integrated motor controller and driver for 2-phase stepper motors

TMC5161 cDriver™ IC

Trinamic Motion Control 's TMC5161 cDriver solution is an easy-to-use building block with a powerful integrated MOSFET driver stage and complete motion control functions, including innovative current regulation.

The TMC5161 sets new maximums for motor voltage and current specifications in a monolithic motion controller with integrated MOSFETs. The result is an integrated IC that enables superior stepper motor control, reducing designers' need for specialized motor control expertise.

Designed with ease of use in mind, the powerful chip can be easily set up and evaluated using Trinamic's free, easy-to-use TMCL-IDE software and modular evaluation kits. This not only minimizes development time but also allows engineers to quickly try different parameters to achieve optimal results, including highly demanded Trinamic technologies such as SixPoint™ ramp, StealthChop2™ (quiet chopper mode), StallGuard2™ (sensorless stall detection and mechanical load measurement), and more.

The cDriver covers a wide range of applications, from battery-powered, high-efficiency systems to embedded applications, and is ideal for robotics and industrial drives, textile, laboratory and office automation, medical drives, and next-generation desktop manufacturing applications. The complete solution minimizes the learning curve while delivering best-in-class performance.

The TMC5161 is available in a compact 10 mm x 10 mm aQFN package. The cDriver will also be available as an evaluation kit and breakout board for rapid evaluation and parameterization. Features and Benefits

  • 2-phase stepper motor, up to 3.5 ARMS Coil current
  • 8 VDC Up to 40 VDC(55 V peak)
  • Integrated 45 mΩ MOSFETs, low RDS(ON) High efficiency
  • SPI and single-wire UART
  • Step/dir interface with 3D-optimized interpolation MicroPlyer™ (microstep interpolator)
  • Motion controller with SixPoint ramp as an intelligent peripheral
  • Encoder interface and 2x ref-switch inputs
  • 256 microsteps per step
  • StealthChop2, SpreadCycle™ (high-precision chopper algorithm), DcStep™ (load-dependent speed control), StallGuard2, and CoolStep™ (current-saving control)
  • Compact aQFN package measuring 10 mm x 10 mm
← Back to News