0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

TMC2240 Usage Feedback and Key Differences from TMC2226

TMC2240 has been on the market for a year and a half, and many engineers are familiar with the chip; continuous testing has also reflected its excellent performance. As an upgraded version of TMC2226, what are the obvious differences? 1. TMC chips usually have two chopper modes: stealthChop […]

2024-01-05 技术文章
TMC2240使用反馈,与TMC2226的明显区别

TMC2240 has been on the market for a year and a half, and many engineers are familiar with the chip; continuous testing has also reflected its excellent performance. As an upgraded version of TMC2226, what are the obvious differences?

1. TMC chips generally have two chopper modes: stealthChop and spreadCycle. stealthChop is quieter but has a speed limit of about 300 RPM. spreadCycle can be used at low speed and also supports higher speeds, such as 2000 RPM, but in the medium-to-low speed range it produces a kind of current noise.
If TMC2209 switches chopper mode while the motor is rotating, it causes jitter. TMC2240 has been optimized for this and can switch smoothly without jitter.

2. TMC2226 stall detection uses StallGuard2 technology, which is more suitable for use in stealthChop mode. TMC2240 integrates both second-generation and first-generation technology, so it can be used in both chopper modes.

3. TMC2226 has a maximum voltage rating of 29 V. TMC2240 has a voltage rating of 36 V, supports higher voltages, and is friendlier to the 36 V supply commonly used in the industry, undoubtedly expanding its application periphery.

4. Both chips require STEP and DIR signals to control motor rotation. TMC2226's UART can be left unused. TMC2240 must use it, and it also supports an SPI interface. However, the stall detection function can only be used after configuring registers.

5. The TMC2226 requires two current-sense resistors. If the component selection is not done properly, it can affect motor rotation performance. The TMC2240 integrates the sense resistors, giving the chip better performance while reducing the number of external components, saving space for the controller, reducing R&D workload, and shortening the project schedule.

6. The TMC2240 also adds an ADC pin. The ADC value of the pin input voltage can be obtained by reading a register.

7. The TMC2240 integrates a temperature sensor, allowing the chip temperature to be obtained.

8. Both the TMC2240 and TMC2226 are models with integrated MOSFETs. However, the newly upgraded TMC2240 has lower on-resistance, so at the same output power the TMC2240 has a smaller temperature rise, which is a clear advantage of this chip.

← Back to News