0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

TMC2226 Ultra-Quiet Stepper Motor Driver IC with Step/Direction

The TMC2226 is suitable for 5…29V stepper motors up to 2.8A (peak), combining the world's best stepper motor driver technology with a simple, easy-to-use step/direction interface. May 11, 2020 – TRINAMIC Motion Control GmbH announces the launch of its latest stepper motor driver for 2-phase bipolar stepper motors […]

2020-05-11 New Product Information
No cover image

The TMC2226 is suitable for 5…29V stepper motors up to 2.8A (peak) and combines the world's best stepper motor driver technology with a simple, easy-to-use step/direction interface.

May 11, 2020 – TRINAMIC Motion Control GmbH announces the launch of its latest stepper motor driver for 2-phase bipolar stepper motors. The highly dynamic stepper driver can be programmed via UART and features some of Trinamic's latest-generation technologies, making it ideal for design upgrades using compatible drivers.

The chip ensures noiseless operation with StealthChop2, enabling smooth and quiet stepper motors for everyday use. At the same time, compared with conventional choppers, the advanced chopper improves efficiency and motor torque. After tuning, engineers can simply store settings in OTP memory and use them for standalone motion with the internal pulse generator. This makes the TMC2226 an effective and cost-efficient solution for printers and POS equipment, office and home automation, textile, security, ATM and cash recycling machines, and battery-powered devices.

Trinamic founder and CEO Michael Randt explained: 'Step/direction is still the most common interface for communication between existing motion controllers and stepper motor drivers. With the TMC2226 stepper driver IC, engineers can easily upgrade existing designs or develop new applications without leaving the S/D interface. Programming and debugging the chip via UART makes it a user-friendly stepper motor driver IC while offering all the benefits of our latest technology, simplifying system development and reducing indirect costs.'

In addition to StealthChop2, the chip also features StallGuard4 (for sensorless load and stall detection), CoolStep (for minimizing energy consumption) and SpreadCycle (for keeping noise and vibration to a minimum when driving motors at higher speeds). In addition, low RDSon and automatic power-down improve energy efficiency, making it a thermally robust step/direction driver that is extremely attractive.

The TMC2226 is available in a thermally optimized HTSSOP28 package (9.7x6.4mm) that facilitates optical inspection, features full protection and diagnostic functions, and offers an internal sense resistor option. Chips, evaluation boards and breakout boards will be available through Trinamic's official distribution channels in early May.

Features and Benefits:

Two-phase stepper motor, coil current (peak) up to 2.8 A, 2 A RMS

Voltage range 4.75…29 V DC

STEP/DIR interface with 8, 16, 32, or 64 microstep pin settings

Single-wire UART and OTP provide advanced configuration options

Smooth operation at 256 microsteps via MicroPlyer™ (microstep interpolator) interpolation

StealthChop2™ (quiet chopper mode), SpreadCycle™ (high-precision chopper algorithm), StallGuard4™, and CoolStep™ (current-saving control)

Low RDSon and low heat: LS 170 mΩ and HS 170 mΩ (typical at 25°C)

Low-power standby to comply with standby energy regulations

Internal sense resistor option (no sense resistor required)

Passive braking, freewheeling, and automatic power-off

Integrated pulse generator for standalone motion

Comprehensive protection and diagnostics

Thermally optimized HTSSOP package (9.7 x 6.4 mm) for easy optical inspection

 

About Trinamic

TRINAMIC Motion Control develops the world's most advanced technologies for motion and motor control applications. Our advanced integrated circuits, modules, and mechatronic systems enable today's software engineers to quickly and reliably develop high-precision drives that operate efficiently, smoothly, and quietly. Trinamic is headquartered in Hamburg, Germany, has an R&D center in Tallinn, Estonia, and has its own sales engineer teams in Chicago, USA, and Suzhou, China.

← Back to News