The PD42-x-1240 integrates Trinamic's latest stepper motor drive technology, including the popular quiet control mode StealthChop™.
TRINAMIC's PD42-x-1240 is a complete mechatronic solution consisting of the TMCM-1240 stepper control module and a NEMA 17 motor. Using TRINAMIC's TMC5160 motion controller and motor driver, the PD42-x-1240 lets users use TRINAMIC Motion Control Language (TMCL™) or CANopen® firmware to control the module. Dynamic current control, quiet, smooth, and efficient operation, combining features such as StealthChop™, DcStep™ (load-dependent speed control), StallGuard™ (sensorless stall detection and mechanical load measurement), and CoolStep™ (current-saving control).
- NEMA17 stepper motor / 42 mm
- 0.22 Nm to 0.7 Nm
- With controller/driver
- Linear and sixPoint™ ramp
- +10 VDC Up to 30 VDC Supply voltage
- Up to 2 ARMS Motor current
- RS485, CAN, and USB interfaces
- Integrated SensOstep™ encoder and external encoder support
- S/D Interface
- Multi-path Inputs and Outputs
- Laboratory Automation
- Manufacturing
- Semiconductor Processing
- Robotics
- Factory Automation
- Test and Measurement
- Life Sciences
- Biotechnology
- Liquid Handling
Related Products
| PD42-1-1240-CANOPEN | PANDRIVE NEMA17, 24V, 0.22NM |
| PD42-2-1240-CANOPEN | PANDRIVE NEMA17, 24V, 0.36NM |
| PD42-3-1240-CANOPEN | PANDRIVE NEMA17, 24V, 0.44NM |
| PD42-4-1240-CANOPEN | PANDRIVE NEMA17, 24V, 0.7NM |
| PD42-1-1240-TMCL | PANDRIVE NEMA17, 24V, 0.22NM |
| PD42-2-1240-TMCL | PANDRIVE NEMA17, 24V, 0.36NM |
| PD42-3-1240-TMCL | PANDRIVE NEMA17, 24V, 0.44NM |
| PD42-4-1240-TMCL | PANDRIVE NEMA17, 24V, 0.7NM |