In fields such as modern industrial automation and consumer electronics, the demand for multi-axis coordinated control of stepper motors is increasingly prominent—both independent high-precision positioning of two axes and compact design with quiet operation are required. The TMC5041 from Germany's Trinamic (now part of ADI), with "integrated driver and controller + dual-axis integration" as its core advantage, ingeniously integrates dual motion controllers, pre-drivers, and power MOSFETs into a compact 7×7 mm QFN48 package. It aims to achieve independent dual-axis control with a single chip, providing an efficient, reliable solution for applications requiring precise motion control and ultra-quiet operation.

I. Product Overview
The TMC5041 is a highly integrated dual-axis stepper motor driver and control chip with a serial communication interface. Its core value lies in "high integration + intelligent control": it integrates two complete stepper motor control channels in one chip, each containing an independent motion controller, pre-driver, and power output stage (a full H-bridge formed by low-RDSon N-channel power MOSFETs). Each axis is equipped with an independent SixPoint™ ramp generator, current regulator, and chopper controller, supporting synchronous or asynchronous dual-axis motion. Meanwhile, the SPI interface enables parameter configuration, real-time diagnostics, and motion control, greatly simplifying system design and reducing PCB area and BOM cost. The TMC5041 is very suitable for compact devices with multi-axis cooperative operation.

TMC5041 Pinout Diagram
II. Core Technical Features:
The TMC5041 is equipped with multiple proprietary Trinamic technologies that improve motor control quality across four dimensions: quiet operation, dynamic performance, energy-efficiency optimization, and load protection. All functions are implemented in hardware with no software dependency, and response speed reaches the nanosecond level.
StealthChopTMSilent Control:This technology is a low-speed silent drive mode. It uses a voltage-mode PWM chopping algorithm to make the motor at standstill and at low-to-medium speeds (<300RPM) nearly silent (only bearing mechanical noise), reducing motor noise and vibration, maintaining smooth motor operation, and suitable for noise-sensitive office, medical, and other scenarios.
SpreadCycleTMAnti-Jitter Technology:High-precision chopping algorithm with periodic current control. Through four-stage chopping of “on → slow decay → fast decay → slow decay”, it automatically optimizes fast decay time, and at high speeds (>300RPM) suppresses vibration and resonance, ensuring smooth motor operation, improving motor running stability and precision, and reducing noise pollution.
StallGuard2TMStall Detection:This technology allows a stepper motor to calculate the load value (SG_RESULT) by monitoring the motor back EMF without additional sensors, enabling stall protection and sensorless homing and simplifying mechanical design (no limit switches required). It simplifies the system structure, reduces cost, and improves system reliability and flexibility.
MicroPlyerTMProgrammable microstep table:Built-in 1024-point sine wave microstep table, supporting up to 256 microsteps per full step; the waveform can be customized via MSLUT registers to optimize microstep smoothness for low-cost motors (e.g., reducing the effects of cogging torque).
SixPointTMRamp controller:The six-point ramp controller provides great flexibility for motion profile planning, supports a six-point motion curve with “dual acceleration + dual deceleration,” adapts to complex scenarios (e.g., precision positioning and reciprocating motion), reduces mechanical shock, improves operating stability, and achieves smooth start/stop and high-speed motion.
CoolStepTMAdaptive current control:This technology relies on StallGuardTMload value to achieve sensorless current that dynamically varies with load, automatically adjusting the motor’s current supply. When the load is low, CoolStepTMreduces the motor’s current supply, thereby reducing motor heating and energy consumption. When the load increases, the current supply automatically increases to ensure normal motor operation. It can save up to 75% energy, reducing equipment operating power consumption and heating.

TMC5041 Block Diagram
3. Wide Adaptation Range and Comprehensive Protection Features
Electrical Parameters and Interface Characteristics
The electrical characteristics of the TMC5041 accommodate multi-scenario power supply and motor requirements while providing flexible control interfaces:
| Feature Category | Detailed Specifications |
| Operating Voltage | 4.75 V to 26 V DC (single supply); in 5V-only mode, supports 4.7 V to 5.4 V (requires bridging the internal LDO) |
| Output Current | Continuous current 1.1 A RMS per axis; peak 1.5 A (TJ ≤ 105°C, 50% duty cycle, 100 ms short-duration acceleration) |
| Control Interface | High-speed SPI interface (up to 8 MHz, 40-bit data frame with CRC), supporting register read/write and real-time diagnostics |
| Auxiliary Functions | 2 reference switch inputs (REFL/REFR) per axis, supporting hardware homing; INT/PP interrupt and position pulse output |
Comprehensive Protection and Diagnostic Functions
The chip integrates comprehensive protection functions, providing overcurrent protection (OCP), short-circuit detection (SC), open-load detection (OLA/OLB), undervoltage protection (UVLO), overtemperature protection (OTP), and passive braking. These functions not only enhance system reliability but also extend equipment service life, ensuring safe and stable operation of the chip and motor system under various abnormal conditions.
4. Typical Application Scenarios
The TMC5041's quiet operation, high efficiency, high integration, and dual-axis control features make it suitable for many fields:
| Application Area | Specific Scenario | Core Value |
| Security and Video Conferencing | PTZ camera (PAN/TILT axes) pan and tilt | Low-speed quiet (<300 RPM), sensorless homing, avoiding noise interference in conference and surveillance applications |
| Office automation | Printer paper feed mechanisms, scanner platform drives, copier drum control | High speed and smooth operation, energy saving, quiet operation; reduces equipment power consumption, heat, and noise |
| Medical and laboratory | Infusion pumps (precision fluid delivery), liquid handling systems, ventilator valve control | High-precision positioning (256 microsteps), fault self-protection, quiet operation, ensuring reliability of medical and laboratory equipment |
| Financial equipment | ATM cash recycling modules, POS machines (banknote transport) | Dual-axis independent control (e.g., transport axis + positioning axis), wide voltage adaptation (4.75 V to 26 V) |
| Industrial and consumer electronics | Small multi-axis robots, antenna positioning, smart home damper control, 3D printers (dual Z-axis) | Compact design (7×7 mm), programmable microstep table, high-precision and highly integrated design, suitable for device miniaturization needs |
V. Development and Evaluation Support
Trinamic provides a complete evaluation kit—the TMC5041-EVAL-KIT—which includes a baseboard, connector board, and TMC5041 driver board. It supports single/dual motor connections and allows direct testing of functions such as StealthChop™ and CoolStep™, with reserved oscilloscope test points (e.g., motor current, SG_RESULT). With the free TMCL-IDE graphical software tool, developers can get started quickly, easily configure parameters, monitor motor motion status and data in real time, and significantly shorten development cycles. Trinamic also provides extensive technical documentation, including detailed datasheets and application notes, offering comprehensive guidance for hardware design and software programming.
VI. Comparison with Similar Trinamic Products
Compared with integrated single-axis motion control and driver ICs
| Comparison dimension | TMC5041 (dual-axis) | TMC5130 (single-axis) |
| Number of controlled axes | Independent control of 2 axes | 1-axis control |
| Output current | 1.1 A RMS/axis, 1.5 A peak (short-term) | 1.4 A RMS, 2.5 A peak |
| Operating voltage | 4.75V~26V DC | 4.75V~46V DC |
| Package | QFN-48 | TQFP-48 |
| Key differences | Dual-axis integration, compact design, focused on multi-axis coordination | Higher voltage/current, supports external encoder, focused on single-axis high performance |
When comparing the TMC5041 with the TMC5130, both are high-performance stepper motor drivers and motion controllers with serial interfaces. They share Trinamic's advanced core technologies such as quiet operation, vibration suppression, energy efficiency, and sensorless load detection. Both are powerful in function, and their application areas overlap to some extent. The TMC5041 provides dual-axis independent control and can control two stepper motors simultaneously. It uses a QFN48 package (7×7 mm) and is suitable for multi-axis drive control applications. The TMC5130, by contrast, focuses on single-axis high performance and high-precision control. It uses a TQFP48 package (7×7 mm), supports a wider operating voltage range (4.75 V to 46 V DC), and can drive higher-power stepper motors (continuous current 1.4 A, peak 2.5 A). If your product is single-axis controlled but pursues the mechanism's performance, precision, and quietness—for example, high-end office automation equipment or precision medical laboratory instruments—the TMC5130 is recommended. For scenarios requiring control of two stepper motors, the TMC5041's single-chip dual-axis independent control design can greatly reduce the number of external components and PCB area, lowering system complexity and overall cost. Its high-performance quiet operation also well meets precision and silent-operation requirements, making it an ideal choice for dual-axis stepper drive and control solutions.
Compared with similar multi-axis motion control and driver ICs
| Feature dimension | TMC5041 | TMC5031 |
| Number of control axes | 2 | 2 |
| Output current | 1.1 A per axis, up to 1.5 A peak | 1.1 A per axis |
| Operating voltage | 4.75V~26V | 4.75V~16V |
| Interface | SPI+S/D | SPI |
| Maximum microstep resolution | 256 | 256 |
| Core technology | Supports StealthChop™ (quiet) and SpreadCycle™ | Supports SpreadCycle™ only |
| Package type | QFN-48(7×7mm) | QFN-48(7×7mm) |
| Applications | Multi-axis equipment requiring quiet operation, etc. | Noise-insensitive or low-cost equipment, etc. |
7. Conclusion
The TMC5041 is a high-performance, highly integrated dual-axis stepper motor driver and controller chip. With "single-chip dual-axis drive and control," it breaks away from the "multi-chip stacking" approach of traditional multi-axis systems, greatly simplifying system design and saving space and cost. It integrates multiple Trinamic core technologies to enable intelligent control, silent operation, and more, improving end-product quality. For stepper motor applications requiring multi-axis operation, quietness, high efficiency, and precise control, the TMC5041 is a highly attractive solution.
With the deepening advancement of Industry 4.0 and intelligent manufacturing, the TMC5041 will play an even more important role in multiple fields and aspects. To learn more about the TMC5041 or to request samples, please contact us: Shenzhen Chiplink Microelectronics Co., Ltd. (Email: sales@chiplinkstech.com). We look forward to working with you.

Sample Request
Attached main parameter table:
| Axes | 2 |
| Motor Supply | 5…26V |
| Microsteps | 1…256 |
| SPI | Yes |
| trapezoidal | Yes |
| SixPoint™ | Yes |
| microstep table | Yes |
| CoolStep™ (current-saving control) | Yes |
| passive braking | Yes |
| short-circuit detection | Yes |
| SpreadCycle™ (high-precision chopper algorithm) | Yes |
| Stall detection | Yes |
| StallGuard2™ (sensorless stall detection and mechanical load measurement) | Yes |
| StealthChop™ | Yes |
| Phase Current, RMS | 1.1A |
| Package | QFN48 (7x7) |
| Product status | Mass production |