0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

NSOPA082: A Performance Benchmark for High-Voltage General-Purpose Op Amps — An In-Depth Look at a Domestic Dual-Channel Op-Amp Solution

General-purpose operational amplifiers are typically low-cost and well-balanced, and their specifications (such as gain, bandwidth, and offset voltage) can meet most conventional application requirements, covering industrial control, power management, consumer electronics, and other areas. The NSOPA082 is a dual-channel general-purpose operational amplifier from NOVOSENSE, offering low offset, high slew rate, and a wide voltage range [...]

2026-01-14 方案应用
NSOPA082:高压通用运算放大器的性能标杆——国产双通道运放解决方案深度解析

General-purpose operational amplifiers are generally low-cost and well-balanced; their specifications (such as gain, bandwidth, and offset voltage) can meet most conventional application requirements and are widely used in industrial control, power management, consumer electronics, and other areas. The NSOPA082 is a dual-channel general-purpose operational amplifier launched by NOVOSENSE. With advantages such as low offset, high slew rate, and a wide voltage range, it can be a preferred choice for general-purpose op amps.

1. Product Positioning

The NSOPA082 is part of NOVOSENSE's NSOPA08x family of high-voltage general-purpose operational amplifiers (including the dual-channel 082 and quad-channel 084), featuring "dual-channel integration + general-purpose adaptability":

  • Dual-channel integration: Two independent operational amplifiers are integrated on a single chip, saving PCB layout space and bill-of-materials cost and suiting scenarios that require parallel processing of multiple signals;
  • General-purpose adaptability: It supports multiple operating modes such as closed-loop amplification, active filtering, and open-loop comparators, and can replace traditional discrete op-amp solutions to reduce system complexity.

The NSOPA082 device delivers excellent specifications and is particularly suitable for cost-sensitive applications that require high slew rates for high-voltage signals, such as motor drivers and inverter systems, and can be used in harsh application environments. In addition, the official website states that this series offers industry-leading performance compared with the internationally known TL08x series.

Functional Block Diagram

 II. Performance Analysis

NSOPA082 delivers excellent performance across core dimensions such as accuracy, response speed, anti-interference capability, and reliability:

  • High accuracy: the input offset voltage is typically 0.5 mV, and offset voltage drift is as low as 1 µV/°C. It maintains stable accuracy over a wide temperature range from -40°C to 125°C, avoiding measurement errors caused by temperature fluctuations. By contrast, TL082's next-generation product, the higher-performance TL082H, has corresponding parameters of 1 mV and 2 µV/°C and is slightly inferior to the domestic device in static accuracy and temperature-drift stability.
  • High dynamic response: NSOPA082 has a typical slew rate of 30 V/µs (positive) and 20 V/µs (negative), a unity-gain bandwidth of 6 MHz, a settling time of 0.8 µs for a 10 V step signal (0.1% accuracy), and an overload recovery time of 200 ns. It offers excellent pulse compatibility and can respond quickly to complex signals. TL082H has a slew rate of 20 V/µs, a bandwidth of 5.25 MHz, and an overload recovery time of 300 ns; NSOPA082 offers better performance.
  • Wide operating range: the supply voltage covers 4.5 V to 36 V (single supply) or ±2.25 V to ±18 V (dual supply). Its maximum value is slightly lower than that of TL082H (40 V/±20 V). The common-mode input voltage range includes the positive supply rail, and the differential input voltage can approach the supply rails, making it suitable for various high-voltage supply architectures.
  • Strong anti-interference and high fidelity: it integrates EMI and RF filters. At 1 GHz, the EMI rejection ratio (EMIRR) reaches 66 dB; the typical common-mode rejection ratio (CMRR) is 109 dB; and the input voltage noise density (at 10 kHz) is 15 nV/√Hz. It can effectively resist RF interference and common-mode interference in industrial environments and provides high fidelity during weak-signal acquisition. Under the same conditions, TL082H has an EMI rejection ratio of 53 dB, a CMRR of 105 dB, and a noise density of 21 nV/√Hz; its anti-interference capability and signal purity are inferior to those of NSOPA082, and it is more susceptible in dense circuit layouts or strong-interference scenarios.
  • High-reliability design: ESD protection reaches ±2 kV (HBM/CDM), with output short-circuit protection. Total harmonic distortion plus noise (THD+N) is as low as -105 dB (slightly inferior to TL082H), meeting high-reliability requirements. It internally incorporates a slew rate boost module (Slew Boost) that optimizes positive and negative current transfer efficiency and further improves response speed.

Overall, the NSOPA082 comprehensively surpasses the TL082H in core performance dimensions such as static accuracy, dynamic response, and anti-interference capability. Although it is slightly inferior in total harmonic distortion, operating voltage range, and power consumption, its overall performance is relatively more balanced, which also corroborates its official website claim: industry-leading performance.

 III. Parameter Summary

Parameter Category NSOPA082 TL082H
Slew Rate 30V/us 20V/us
Unity-Gain Bandwidth 6MHz 5.25MHz
Offset Voltage 0.5mV 1mV
Offset Voltage Drift 1uV/℃ 2uV/℃
Power Consumption 1200uA/channel 1143uA
Common-mode rejection ratio (CMRR) 109dB 105dB
Supply voltage range 4.5V to 36V (single supply) / ±2.25V to ±18V (dual supply) 4.5V~40V/±2.25V~±20V
Low noise at 10kHz 15nV/√Hz 21nV/√Hz
Total harmonic distortion -105dB Approximately -108dB
Operating temperature -40℃~125℃ -40℃~125℃
Package SOP8;MSOP8 SOIC; SOT-23; TSSOP (all 8-pin)

IV. Application Scenarios

With its general-purpose design and high performance, the NSOPA082 is widely suitable for multiple industrial and consumer electronics scenarios:

1. Active Filtering

Suitable for Sallen-Key second-order low-pass/high-pass/band-pass filters. Its low-noise and high-CMRR characteristics can effectively filter out power-line interference and high-frequency noise in industrial environments. Typical design example: a 1 kHz low-pass filter can be configured with R1 = 9.1 kΩ, R2 = 13 kΩ, C1 = 10 nF, and C2 = 20.5 nF to achieve stable amplitude-frequency and phase-frequency characteristics.

2. High-Side Current Sensing

With a wide common-mode voltage range and high accuracy, it is suitable for high-side current monitoring of power buses and motor windings. With matching resistors (0.1% accuracy recommended), the detection error is small. Its strong EMI suppression capability prevents detection distortion caused by bus interference.

3. Industrial Process Control

Used in signal processing units of PLC and DCS systems, it is suitable for signal amplification of industrial sensors such as flow, pressure, and liquid level sensors, as well as threshold judgment in process control (open-loop comparator mode). Its wide temperature range and high anti-interference characteristics enable it to handle harsh operating environments.

4. Power Control and Monitoring

The wide-voltage supply adapts to different power architectures. Output short-circuit protection prevents device damage caused by power supply faults. It can be used in voltage/current feedback loops of inverters and switching power supplies. The voltage slew rate ensures fast feedback response and stable power output.

5. Data Acquisition

With low-noise and high-precision characteristics, it is suitable for the signal conditioning stage in data acquisition systems. It can accurately amplify weak signals output by sensors and provide high-quality input for subsequent ADC conversion, making it applicable to test instruments and equipment data acquisition modules.

V. Conclusion

NSOPA082 is built around "dual-channel integration + high performance + broad adaptability + high reliability." It solves the cumbersome layout and high cost of traditional single-channel op amps and breaks through the performance bottlenecks of general-purpose op amps in high-voltage and high-noise environments. Compared with the international product TL082H, it leads comprehensively in key indicators such as response speed, anti-interference capability, and precision stability, while retaining the high cost-effectiveness and flexible adaptability of general-purpose op amps. For end enterprises, NSOPA082 not only simplifies system design and reduces total cost, but also helps ensure supply chain security through localized supply, making it a preferred choice for general-purpose operational amplifiers.

For more information about the NSOPA08x series high-voltage general-purpose operational amplifiers or to request samples, please contact the official authorized distributor: sales@chiplinkstech.com (email). WeChat ID: 智联微-电机控制芯片, which provides product selection services and technical support.。

附样品申请二维码

Attached Sample Request

微信公众号二维码

WeChat Official Account

← Back to Solutions