0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

NSI3612D: High-Reliability Reinforced Isolated Amplifier with Integrated Isolated Power Supply

The global motor drive IC market is expected to climb from USD 6.8 billion in 2025 to USD 12.16 billion in 2035. The continued expansion of photovoltaic and energy storage applications is also driving iterative upgrades in high-voltage sampling technology. High-power electronic systems are accelerating toward higher voltage levels and higher power density, directly increasing demand for simple, efficient isolated voltage sampling […]

2026-04-10 Solution Applications
NSI3612D:高可靠性集成隔离电源的增强型隔离放大器

The global motor drive IC market is expected to rise from USD 6.8 billion in 2025 to USD 12.16 billion in 2035. The continuous expansion of the photovoltaic and energy storage sectors is likewise driving iterative upgrades of high-voltage sampling technology. High-power electronic systems are accelerating toward higher voltage classes and higher power density, which directly boosts the urgent demand for simple and efficient isolated voltage sampling solutions.

In traditional designs, engineers must deploy separate power supply circuits on the high-voltage side and low-voltage side. External isolated power modules not only occupy a large amount of PCB area but also significantly increase system complexity and BOM cost. As high-voltage application scenarios such as industrial motor drives, PV inverters, and new energy vehicle electric drives continue to expand, the market calls for more integrated isolated sampling solutions.

Against this backdrop, NOVOSENSE Microelectronics launched the new-generation NSI36xx series of isolated sampling chips with integrated isolated power. As the isolated voltage amplifier product in this series, the NSI3612D adheres to a design philosophy of “integrated power + flexible output + built-in protection,” redefining voltage sampling design for high-voltage systems.

1. Integrated Isolated Power Supply: One Chip “Lights Up” the High-Voltage Side

The previous generation of isolated sampling solutions required engineers to design power supply circuits separately for the high-voltage and low-voltage sides, and to add an external isolated power supply to power the high-voltage side. This design not only increased power supply design complexity but also lengthened development cycles.

The NSI3612D integrates a complete isolated DC/DC converter and high-side and low-side LDO linear regulators. By providing only a single 3.0 V to 5.5 V supply on the low-voltage side (controller side), it can complete high-voltage-side circuit powering and isolated signal transmission without the need to design an additional external isolated power supply. In addition, its high-side LDO can support an external load current of up to 1 mA, satisfying the light-load power supply requirements of high-voltage-side auxiliary circuits and further enhancing design flexibility.

This highly integrated design delivers significant practical value to users: by integrating an isolated power supply, it eliminates the need for an external standalone isolated power module, effectively reducing overall BOM cost by approximately 10%–20% while saving about 30%–50% of PCB area. For space-constrained compact devices and designs pursuing high power density, the NSI3612D provides a viable path from “complex” to “streamlined.”

Functional Block Diagram

 II. Automotive-Grade High Precision: Rock-Solid Performance Across the Full Temperature Range

For high-voltage isolated sensing, accuracy is the core lifeline. Leveraging Novosense’s mature high-precision analog and isolation technologies, the NSI3612D delivers ultra-high accuracy and stability across the full operating temperature range.

In terms of core accuracy specifications, the NSI3612D has a typical input offset voltage of ±0.1 mV at room temperature and a maximum of only ±0.5 mV, enabling accurate sampling even with weak voltage signals. Its maximum input offset voltage temperature drift is ±10 μV/°C, and the maximum gain error temperature drift is ±45 ppm/°C. Over the full operating temperature range of -45°C to 125°C, zero-point and gain drift are extremely small, ensuring long-term measurement accuracy without frequent software calibration. The maximum nonlinearity over the full input range is only ±0.04%, and the typical nonlinearity temperature drift is 1 ppm/°C, ensuring high-fidelity reproduction of the sampled signal with no waveform distortion or measurement deviation.

In addition, the NSI3612D supports a ±1 V linear differential input range, with a typical single-ended input impedance of 0.8 GΩ and a differential input impedance of 1.2 GΩ. Its high input impedance makes it highly suitable for connection to high-voltage resistor dividers or other voltage signal sources with high output resistance, adapting to divided sampling scenarios for AC and DC high-voltage signals.

More importantly, the NSI3612D has passed AEC-Q100 Grade 1 automotive-grade certification and fully meets the stringent standards for automotive OEM applications. Even under extreme conditions such as the extreme high temperatures in the engine compartment of new energy vehicles in summer or sub-zero cold starts in winter, it can still maintain stable sampling accuracy, providing accurate and reliable data support for BMS voltage monitoring and closed-loop control of inverter bus voltage.

Parameter Item Specifications
Linear input voltage range ±1V
Low offset error and drift ±0.5 mV (max), ±10 μV/°C (max)
Low gain error and drift ±0.25% (max), ±45 ppm/°C (max)
Low nonlinearity and drift ±0.04% (max), ±1 ppm/°C (typ.)
Operating temperature -40℃~125℃
Package SOP16(300mil)

Package View

III. Ultra-Strong Anti-Interference: Rock-Solid in High-Voltage Noise Scenarios

High-voltage scenarios such as motor drives, inverters, and charging stations are always accompanied by severe common-mode transient interference and electromagnetic noise caused by the high-frequency switching of IGBT and SiC devices. This is also a high-risk area where traditional isolated sampling chips are prone to data jumps and sampling failures. With NOVOSENSE's self-developed capacitive isolation technology and advanced Σ-Δ modulation/demodulation architecture, the NSI3612D achieves industry-leading anti-interference performance and can still output stable and accurate sampling data in strong electromagnetic noise environments.

Its core anti-interference and isolation safety performance is exceptionally robust:

  • Ultra-high common-mode transient immunity: CMTI typical value as high as 150 kV/μs, minimum value 100 kV/μs, effectively suppressing fast common-mode transient interference caused by high-voltage switching operations and preventing sampling data errors and jumps;
  • Top-tier isolation withstand voltage capability: UL1577 certified, supports 5000 Vrms isolation withstand voltage (1-minute test) and up to 1500 Vrms continuous working isolation voltage, meeting reinforced insulation safety requirements and building a solid safety barrier between the high-voltage side and the low-voltage controller;
  • Excellent noise rejection: typical DC common-mode rejection ratio of 100 dB and typical power-supply rejection ratio of 109 dB, effectively filtering out the impact of common-mode noise and power-supply ripple on sampling accuracy;
  • Wide signal bandwidth: typical bandwidth of 340 kHz and typical SNR of 83 dB, covering not only mains-frequency AC voltage sensing but also readily meeting the high-frequency voltage sampling requirements of inverters.

In addition, the chip has passed the full set of international safety certifications including VDE0884-17, CQC, CSA, and TUV; its minimum creepage distance/clearance reaches 8 mm, and its CTI (Comparative Tracking Index) is >600 V, meeting the stringent requirements of pollution degree 2 and overvoltage category IV. Whether for automotive high-voltage platforms or industrial grid high-voltage scenarios, the NSI3612D provides ample safety margin.

Parameter Specification
CMTI 150kV/μs
Isolation Withstand Voltage 5000Vrms
DC Common-Mode Rejection Ratio 100dB
Power-Supply Rejection Ratio 109dB
Signal bandwidth 340kHZ
Minimum creepage distance / clearance 8mm

IV. Flexible Output Configuration: Adapting to Diverse Sampling Scenarios

Different applications have different requirements for voltage sampling signals. In long-distance transmission scenarios, differential output provides stronger common-mode interference rejection; in systems requiring a compact design, single-ended ratiometric output can directly match the downstream ADC, reducing the need for signal conditioning circuitry.

The NSI3612D is an isolated voltage amplifier in the NSI36xx series. It comes standard with a fixed 2x gain differential analog output. Its differential clipping output voltage is typically ±2.4 V, and its output common-mode voltage is stable within the 1.35 V to 1.48 V range, making it highly compatible with the input interfaces of mainstream industrial-grade and automotive-grade ADCs. In addition, its typical output impedance is only 0.3 Ω, and it supports capacitive loads up to 500 pF. Its excellent drive capability ensures that the differential signal maintains very low waveform distortion even after long-distance PCB trace transmission, making it suitable for long-distance transmission and scenarios with stringent noise immunity requirements.

Products in the same series also offer a single-ended ratiometric output version, which can directly match the downstream ADC and use the ADC's full-scale input to improve system sampling accuracy. This flexible output configuration design enables engineers to select the most suitable product model based on specific application requirements without incurring additional design costs for the signal chain.

V. Built-in Protection and Diagnostics: From 'Sampling' to 'Safeguarding'

The role of an isolated sampling chip is not only to accurately acquire voltage signals, but also to help the system respond correctly and promptly under abnormal conditions. The NSI3612D features comprehensive built-in system-level diagnostic and protection mechanisms, integrating a three-level fault detection and protection system:

  • ① Full-chain supply undervoltage monitoring: Built-in three-stage undervoltage lockout (UVLO) detection for the isolated power output, high-voltage-side LDO, and low-voltage-side VDD provides real-time monitoring of the chip's full-chain power-supply status and enables rapid protection triggering when the power supply is abnormal;
  • ② Dedicated hardware diagnostic pin: Equipped with an open-drain DIAG diagnostic output pin. It is high-impedance during normal operation; upon detection of abnormal conditions such as supply undervoltage, it immediately actively pulls low. It can connect directly to the MCU's fault-detection IO without additional software logic, enabling fast hardware-level fault reporting;
  • ③ Fail-safe output mechanism: Under abnormal conditions, the chip outputs a fixed -2.5 V differential fail-safe voltage. This voltage range does not occur in normal operation, so the MCU can quickly identify a sampling-chain fault via this characteristic voltage, preventing erroneous sampled data from causing loss of system control.

In addition, the chip integrates comprehensive ESD protection circuitry, meeting AEC-Q100 requirements of ±4 kV HBM (Human Body Model) and ±1 kV CDM (Charged Device Model), ensuring device reliability throughout the entire process from chip production and assembly to complete-system operation. The NSI36xx series as a whole adheres to the design philosophy of “integrated power + flexible output + built-in protection,” providing engineers with a complete platform for unified system-level planning and allowing flexible selection among different models and configuration as needed.

VI. Built for Demanding Applications: From Industrial Control to New Energy Vehicles

The NSI3612D's application scenarios cover a broad range from industrial infrastructure to automotive electronics. In industrial motor drives and servo systems, it can be used for DC bus voltage monitoring and motor phase voltage sampling, supporting continuous operation over a wide temperature range. In photovoltaic inverters, it undertakes the critical role of high-voltage DC-side voltage monitoring, helping the system implement maximum power point tracking and protection coordination. In the new energy vehicle field, the NSI3612D can be used for high-voltage bus voltage sampling in the main drive system and voltage monitoring in the on-board charger (OBC), meeting ASIL-D functional safety requirements. In addition, in power infrastructure such as server power supplies and 5G base station power supplies, it can also enable designs with higher power density.

With automotive-grade reliability, a fully integrated architecture, ultra-high accuracy, and strong immunity to interference, the NSI3612D is highly suited to the high-voltage isolated voltage detection requirements of two major fields: new energy vehicles and industrial automation. Its feature of requiring only a single low-voltage-side power supply is helping an increasing number of engineers eliminate the burden of high-voltage-side power supply and focus their efforts on optimizing core system functions.

VII. Conclusion

Facing the design challenges of high-voltage systems, the NSI3612D offers a simpler way to respond. It turns isolated power from “peripheral design” into “on-chip integration,” output configuration from “a single choice” into “flexible adaptation,” and protection functions from “external add-ons” into “internal integration.” As motor drives, photovoltaic inverters, and new energy vehicle electric drive systems continue to raise their requirements for power density and reliability, the NSI3612D is redefining the boundaries of isolated voltage sampling with fewer components, simpler design, and more reliable performance.

NOVOSENSE Microelectronics, through the NSI36xx series products and leveraging the “Isolation+” full-ecosystem product matrix, provides one-stop support from chips to solutions for voltage sampling in high-voltage systems. For more information about the NSI3612D or to request samples, please contact the official authorized distributor: sales@chiplinkstech.com (email); contact phone: Mr. Chen, 13924675549 (same number on WeChat); WeChat official account: Zhilian Micro - Motor Control Chips.

Appendix: NSI36xx Series Products:

Type Part Number Input Range Output Type
Voltage Detection Amplifier NSI3611D-DSWR 0~2V Differential output
NSI3612D-DSWR ±1V Differential output
NSI36C11R-DSWR 0~2V Single-ended output
NSI36C12R-DSWR ±1V Single-ended output
NSI3611D-Q1SWR 0~2V Differential output
NSI3612D-Q1SWR ±1V Differential output
NSI36C11R-Q1SWR 0~2V Single-ended output
NSI36C12R-Q1SWR ±1V Single-ended output
Current Sense Amplifier NSI3600D-DSWR ±250mV Differential Output
NSI3602D-DSWR ±250mV Differential Output
NSI36C00R-DSWR ±250mV Single-Ended Output
NSI3600D-Q1SWR ±250mV Differential Output
NSI3602D-Q1SWR ±50mV Differential Output
NSI36C00R-Q1SWR ±250mV Single-Ended Output
附样品申请二维码

Sample Request Available

微信公众号二维码

WeChat Official Account

← Back to Solutions