0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

NSD3608-Q1 Automotive-Grade 8-Channel Half-Bridge Gate Driver IC: Empowering Intelligent Actuator Upgrades Under Domain-Control Architecture

As automotive E/E architectures move from distributed ECUs to 'central computing + zonal control,' simplified wiring, centralized diagnostics, and modular software improve maintainability and real-time performance, supporting SDVs. The central platform handles high-compute decisions and software integration; ZCUs in body, cockpit, and chassis zones aggregate signals, distribute power, and control actuators, requiring precise control of multiple power stages and loads in compact spaces.

2026-03-26 Solution Applications
NSD3608-Q1车规级8通道半桥栅极驱动芯片:赋能域控架构下的智能执行端升级

As automotive E/E architectures evolve from distributed ECUs to 'central computing + zonal control,' vehicle systems significantly improve maintainability and real-time performance by simplifying wiring harnesses, centralizing diagnostics, and adopting modular software architectures, laying the hardware foundation for software-defined vehicles (SDVs). In this architectural transformation, the central computing platform acts as the 'central brain,' responsible for high-compute decision-making and software integration, while zonal controllers (ZCU) in zones such as front body, cockpit, and chassis handle signal aggregation, power distribution, and actuator control. They must achieve precise control of multiple power levels and load types within compact spaces.

This imposes higher requirements on actuator-side motor driver ICs: they must combine platform-level compatibility, intelligent diagnostics, high integration, and excellent electromagnetic compatibility (EMC). The NOVOSENSE NSD3608-Q1 8-channel half-bridge gate driver IC is designed precisely for these control needs. With its unique configurable timing charge/discharge current drive technology, integrated current-sensing solution, and comprehensive diagnostic and protection architecture, it provides strong support for zonal controller designs.

1. Product Overview

The NSD3608-Q1 is part of NOVOSENSE's NSD360x family of DC brushed motor pre-driver products (the family also includes the 4-channel NSD3604 and 2-channel NSD3602). It offers a wide operating voltage range of 4.9 V to 37 V, supports 12 V automotive battery systems, and is AEC-Q100 Grade 1 qualified. It is a highly integrated, highly flexible automotive-grade gate driver IC.

The IC integrates eight half-bridge (HB1–HB8) gate drivers and two current-sense amplifiers (CSAs). The gate drivers include advanced functions such as slew-rate control, switching timing feedback, and VGS hardware handshaking, while the current-sense amplifiers support high common-mode voltage inputs. The device uses a 16-bit SPI interface at up to 10 MHz for parameter configuration, device control, and reading status registers for diagnostics. It also features comprehensive diagnostic and protection functions covering supply, gate, load, and temperature, ensuring stable operation under complex automotive conditions.

Functional Block Diagram

The NSD3608-Q1 can independently drive up to 16 external MOSFETs, enabling DC brushed motor control with an average current of over 10 A. It can also be used as a multi-channel high-side switch driver, suitable for automotive applications with multiple motors and loads, such as door modules, seat controllers, power tailgates, and zone controllers.

Parameter Category Performance Specifications
Channel Configuration 8-channel half-bridge gate driver, supporting three control modes: half-bridge, H-bridge, and SPI
Operating Voltage 4.9 V to 37 V (40 V maximum withstand voltage)
Drive Capability Supports average current above 10 A (with external MOSFETs)
PWM Capability Integrated 2-stage charge pump supports 100% duty cycle; 4 PWM inputs support output mapping, with configurable freewheeling mode during PWM
Current Sensing Integrated 2-channel programmable wide common-mode differential amplifiers
Communication Interface 16-bit, 10 MHz SPI, supporting multi-chip daisy-chain cascading
Diagnostics and Protection Undervoltage/overvoltage, VGS/VDS monitoring, open-circuit/short-circuit diagnostics, overtemperature protection, etc.
Operating temperature Tj=-40℃~150℃
Package VQFN56(8×8mm)
Automotive-grade qualification AEC-Q100 Grade1

II. CCPD Technology Reshapes EMC Debugging and Platform-Based Development

In conventional gate pre-driver solutions, the switching characteristics of MOSFETs are fixed by peripheral hardware circuits, and engineers must repeatedly tune external gate resistors and capacitors to balance switching speed and electromagnetic emissions—a time-consuming and cumbersome process. Zone controllers, however, need to accommodate multiple power levels and load types in a compact space, from a few-watt door lock motor to tens-of-watt window motor. At the same time, body actuators—especially power tailgates and sunroofs—are located close to vehicle antennas, wireless communication equipment, and other devices, imposing extremely stringent electromagnetic compatibility (EMC) requirements. Traditional solutions struggle to meet the platform-based development needs of multiple vehicle models and multiple loads.

The NSD3608-Q1 features NOVOSENSE's self-developed patented Configurable Timing Charge/Discharge Current-Type Driver (CCPD) technology, which completely changes this situation. It divides the entire MOSFET turn-on and turn-off process into three fully independent control phases: pre-charge/pre-discharge, main charge/main discharge, and tail charge/tail discharge. The source current/sink current of each phase can be finely adjusted within the range of 0.25 mA to 64 mA. Key parameters such as turn-on/turn-off delay and rise/fall timing can all be configured online in software via a 16-bit, 10 MHz high-speed SPI bus. It also supports VGS hardware handshaking to achieve precise control of the switching process. This means:

  • Simplified hardware design: no external gate resistors or GS/GD capacitors are required, saving BOM cost and reducing PCB space;
  • Platform compatibility: Software-adjustable; the MCU performs closed-loop regulation of drive timing to compensate for load variations and temperature drift, enabling adaptation to MOSFETs of different specifications and load types without frequent modifications to the hardware circuit;
  • EMC performance optimization: Switching characteristics can be flexibly adjusted through software parameters to reduce radiated and conducted interference, helping pass stringent automotive-grade EMC tests.

CCPD Drive Timing Diagram

With CCPD technology based on the NSD3608-Q1, engineers can adapt MOSFETs of different specifications and optimize system EMC performance by adjusting parameters through the host computer, without significantly modifying the hardware circuit. A single hardware design can be compatible with vehicles of different levels, shortening the EMC optimization cycle, improving hardware platform reuse, and reducing the time and material costs of automakers' platform development.

III. Ultimate Reliability: From Low-Voltage Startup to High-Voltage Protection

The automotive power supply system is full of uncertainties—voltage drops during cold crank and voltage spikes during load dump impose extremely high requirements on the robustness of driver chips. From power supply design to diagnostic protection, the NSD3608-Q1 achieves automotive-grade high-reliability design in all dimensions.

In terms of power robustness design, the NSD3608-Q1 itself features a wide operating voltage of 4.9 V to 37 V and withstands a 40 V load-dump voltage, providing sufficient high-voltage protection margin for the system and perfectly covering all operating-condition voltage fluctuations of a 12 V automotive electrical system. At the same time, the chip integrates a two-stage charge pump with spread-spectrum function, ensuring that even in the extreme case where the battery voltage drops to as low as 4.9 V, it can drive the high-side MOSFET at 100% duty cycle, guaranteeing continuous motor torque output under low-voltage conditions. In addition, the chip supports a low-power sleep mode design, which can effectively reduce quiescent current and meet the low-power management requirements of intelligent vehicles.

In terms of diagnostics and protection, the NSD3608-Q1 is equipped with a comprehensive, tiered diagnostic and protection mechanism, demonstrating the comprehensiveness expected of automotive-grade chips:

  • Power monitoring: real-time monitoring covering DVDD undervoltage, PVDD overvoltage/undervoltage, and charge pump voltage undervoltage;
  • Gate and load diagnostics: supports online diagnostics of MOSFET gate-source voltage VGS faults and drain-source voltage VDS overvoltage, enabling load open-circuit/short-circuit detection in both operating and shutdown states;
  • Temperature and system protection: supports staged overtemperature warning and shutdown protection, and a window watchdog timer function; supports brake function on LS5–LS8 channels in both sleep and normal modes; equipped with a dedicated driver disable pin DRVOFF and fault interrupt pin nFLT, allowing fault conditions to quickly trigger hardware protection.

All diagnostic data and operating status can be reported in real time to the domain control unit via a 16-bit high-speed SPI bus up to 10 MHz, enabling not only real-time hardware protection against faults but also vehicle-level fault prediction and health management. This upgrades from "protection after a fault" to "warning before a fault," meeting smart vehicles' core requirements for monitorability and iterative improvement throughout the actuator lifecycle.

IV. Precise Sensing: Integrated Current Detection for Smarter Control

For scenarios such as seat anti-pinch, motor stall detection, and closed-loop control, accurate current sampling is a core foundation for intelligent control. The NSD3608-Q1 integrates two programmable wide-input differential amplifiers (CSAs) that can directly measure the differential voltage across an external shunt resistor, enabling accurate current sampling for the motor.

The CSA module offers extremely high configuration flexibility:

  • Supports high-side, low-side, and in-line sensing topologies, flexibly matching different hardware design solutions;
  • The gain can be flexibly configured at four levels: 10/20/40/80 V/V, adapting to shunt resistors of different ranges and balancing high-current overload detection with precise low-current control;
  • Built-in programmable bias supports bidirectional current sensing and is suitable for current monitoring under motor forward/reverse operating conditions;
  • Supports configurable filter time, effectively filtering spike noise at MOSFET switching transitions and improving sampling accuracy;
  • Configurable overcurrent threshold and fault response.

This integrated design eliminates external op amps and signal-conditioning circuits, simplifies system design, and improves current-sampling accuracy and batch consistency. It meets the motor-drive requirements of different power levels, such as seat controllers, tailgate controllers, and electric running boards.

V. Typical Application Scenarios

With its core advantages of high integration, high flexibility, and high reliability, the NSD3608-Q1 is ideal for multi-load drive scenarios such as body controllers and automotive zone controllers:

  • Body domain controller: A single NSD3608-Q1 can configure eight half-bridges as four full bridges to drive four DC motors simultaneously, covering body loads such as window lift, door locks, mirror adjustment, and power tailgate; the integrated CSA enables accurate current sensing and supports implementation of window anti-pinch algorithms; CCPD technology can flexibly optimize EMC performance, ensuring actuators near the vehicle body antenna meet electromagnetic interference requirements; multiple chips can be cascaded in an SPI daisy chain for centralized control of all vehicle actuators.
  • Zone controller: The small VQFN package meets the high-density layout requirements of compact domain controller spaces, eliminating the need for external gate resistors and sampling op amps and reducing the number of peripheral components. Full-chain diagnostic functions support domain controller functional safety design, and a single hardware platform can adapt to the load requirements of different vehicle grades through software configuration, making it an ideal solution for actuator-end driving in zone controllers.
  • Seat controller: The chip can be flexibly configured for full-bridge, half-bridge, high-side drive, and other topologies. A single chip can cover all driving requirements of seat multi-directional adjustment motors, lumbar support air pumps, ventilation fans, and heating modules, simplifying the BOM.

VI. Conclusion

As automobiles evolve from transportation tools into mobile intelligent spaces, every gentle seat adjustment and every silent opening and closing of a window carry users' expectations for quality. The NSD3608-Q1 automotive-grade 8-channel half-bridge gate driver, with high integration, excellent EMC performance, reliable safety mechanisms, and precise current sensing, empowers the upgrade of intelligent vehicle actuation systems.

Amid the wave of automotive intelligence, the evolution of electronic/electrical architectures has never stopped. The NSD3608-Q1 is NOVOSENSE's profound response to this transformation—with a single chip, it undertakes the mission of driving multiple loads; with comprehensive diagnostic protection, it safeguards the system's safety boundaries. For more information about the NSD360x series driver products or to request samples, please contact the official authorized distributor: sales@chiplinkstech.com (email); WeChat official account: Zhilian Micro - Motor Control Chips; contact phone (Mr. Chen): 13924675549 (same as WeChat), providing product selection services and technical support.

附样品申请二维码

Sample Request Attached

微信公众号二维码

WeChat Official Account

← Back to Solutions