As automotive E/E architectures evolve toward domain centralization, brushed DC motor nodes in the body domain—such as power seats, power tailgates, window lifts, and electronic door locks—continue to grow, and different application scenarios have varying requirements for the channel count of gate driver ICs. Centralized domain control nodes have a higher demand for multi-channel integrated drivers, while the large number of distributed actuator nodes tend to prefer single H-bridge drive solutions. Targeting this most widely used scenario, NOVOSENSE launches the NSD3602 automotive-grade dual-channel half-bridge gate driver IC. By configuring two half-bridges as one H-bridge, it can drive one brushed DC motor or two solenoid valves, providing a highly reliable and cost-effective domestic solution for body motor control.

1. Product Positioning and Series Matrix
The NSD3602 is designed for automotive brushed DC motor applications. Its core architecture integrates three major functions—power driving, current sensing, and fault diagnosis—into one device, effectively reducing external components, shrinking PCB area, and improving overall system reliability. It belongs to the NOVOSENSE NSD360x-Q1 product family, which covers 2-, 4-, and 8-channel half-bridge drivers; different channel counts meet different body control scenarios:
| Part Number | Number of Channels | Drive Capability | Application Scenarios |
| NSD3602 | 2 half-bridges | 1 brushed DC motor or 2 solenoid valves | Power window lift, electronic door lock, single seat motor, power tailgate, power running board |
| NSD3604 | 4 half-bridges | 2 brushed DC motors | Multi-function power seat (fore/aft + backrest), power tailgate + door lock combination |
| NSD3608 | 8 half-bridges | 4 or more brushed DC motors or combinations of multiple load types | Body domain controllers and zone controllers (integrating multiple window, door lock, and seat motors) |
Chip support4.9 V to 37 V wide operating voltage range, with a maximum withstand voltage of 40 V, suitable for complex conditions such as load dump and power supply fluctuations in 12 V automotive systems; built-in single-stage spread-spectrum charge pump, supporting0% to 100% full-duty-cycle PWM output, and can also drive an external reverse-protection MOSFET, covering various topology requirements for motor drive.
For body nodes of different complexity, the NSD3602 offers two differentiated versions:
- NSD3602S:Full-featured SPI interface version, which performs parameter configuration, status readback, and fault diagnosis over a 16-bit SPI bus, suitable for actuators with a high degree of intelligence and requiring fine-grained commissioning;
- NSD3602H:Hardware pin-configuration version, where the drive current, sampling gain, and control mode can be set via an external resistor divider, saving MCU IO resources and making it suitable for cost-sensitive basic motor nodes with relatively fixed functions.
Both products usea 5 mm × 5 mm VQFN32 package, suitable for space-constrained body control modules.

Package pinout view
II. Fine-Grained Gate Drive, Balancing Performance and EMC
Gate drive is the core of motor control. The NSD3602 uses configurable drive current and timing mechanisms to help engineers find the optimal balance among switching loss, noise suppression, and system reliability.
NSD3602S features “CCPD configurable charge/discharge current curve driving”, providing16 adjustable source/sink current levels from 0.25 mA to 64 mA, and can match external N-channel MOSFETs with different gate charges to flexibly control switching speed. This technology divides MOSFET switching into multiple stages: pre-charge/pre-discharge, main drive, and post-discharge. By independently configuring the current and duration of each stage, it precisely shapes the gate voltage waveform, controls dv/dt and di/dt during switching, effectively suppresses voltage spikes and electromagnetic radiation, and shortens the EMC debugging cycle.

CCPD timing diagram
For safety mechanisms, the chip integrates a VGS handshake mechanism and multiple configurable digital dead times, avoiding the risk of shoot-through between the high-side and low-side transistors of the half-bridge at the hardware level. It also supports a two-stage shutdown path consisting of active shutdown and passive discharge. Even if the chip loses power, a passive bleed circuit ensures reliable turn-off of the MOSFET.
3. Integrated High-Precision CSA, Eliminating External Sampling Op Amps
In traditional motor drive solutions, current sensing usually requires an external standalone op-amp and matching circuitry, which not only occupies PCB space but also tends to introduce noise. The NSD3602features one built-in high-performance CSA current-sense amplifier, which can directly replace the external sensing op-amp, simplifying the BOM while improving sensing reliability.
This CSA supports a wide common-mode input range of -2 V to PVDD + 2 V and is compatible with the three mainstream sensing topologies—high-side, low-side, and in-line—adapting to different motor architecture designs. It offers four selectable gains of 10, 20, 40, and 80 V/V (S version), and can cover multiple current ranges when used with a sense resistor. The output offset supports two configurations, AREF/2 and AREF/8, meeting the needs of bidirectional and unidirectional current sensing.
To address spike interference during motor switching transients, the NSD3602S version integrates blanking and sample-and-hold functions that proportionally mask noise at the switching instant and output a stable sensed signal. It also integrates a hardware overcurrent comparator, supporting 8 overcurrent threshold levels and 8 filter time settings; the fault response can be configured as latch, cycle-by-cycle current limiting, warning, and other modes, enabling fast hardware-level overcurrent protection.
4. Comprehensive Automotive-Grade Protection and Diagnostic Mechanisms
As an automotive-grade device, the NSD3602 is built around power-stage reliability and system functional safety, establishing a multi-layer diagnostic and protection system covering the power supply, power transistors, temperature, and system monitoring:
- At the power-supply chain level:Supports PVDD undervoltage/overvoltage monitoring, DVDD undervoltage reset, VCP charge-pump undervoltage monitoring, and AREF reference-source undervoltage monitoring, covering all supply ports of the chip to prevent device damage or malfunction caused by power-supply abnormalities.
- Power-transistor diagnostic level:VDS overvoltage monitoring can identify MOSFET short-circuit faults through the on-state voltage drop, and VGS gate monitoring can detect gate open-circuit and short-circuit abnormalities; the NSD3602S also supports online diagnostics in the off state, using internal pull-up/pull-down current sources to implement MOSFET off-state detection, meeting functional-safety diagnostic requirements for the power stage.
- System-safety level:Equipped with two-level temperature protection (overtemperature warning + thermal shutdown), with temperature hysteresis to prevent frequent shutdown/restart; the NSD3602S has a built-in window watchdog that can monitor the MCU operating status; the BRAKE function can be triggered in both sleep and normal modes, implementing motor short-circuit braking by turning on two low-side MOSFETs; an independent open-drain nFLT fault pin can quickly report abnormalities to the MCU, and together with a configurable fault-graded response mechanism, it is suitable for system designs with different functional-safety levels.
V. Competitor Comparison
The NSD3602, DRV8705, and L99MH92 all belong to the 12V automotive-grade single-H-bridge gate-driver segment. Both the NSD3602 and DRV8705 offer two variants: a full-featured SPI version and a simplified hardware version; the L99MH92 is available only in an SPI-interface version. The key parameter comparison is as follows:
| Parameter | NSD3602 | TI DRV8705 | ST L99MH92 |
| Number of channels | 2 half-bridges | 1 H-bridge (equivalent to 2 half-bridges) | 2 half-bridges |
| Operating voltage | 4.9V~37V | 4.9V~37V | 6V~28V |
| Drive current range | 0.25 mA to 64 mA, 16 levels (S version) | 0.5 mA to 62 mA, 16 levels | Three-level stepped current, maximum 120 mA |
| Drive technology | CCPD configurable timing charge/discharge current drive | Smart Gate Drive intelligent gate driver | Three-level stepped gate current control |
| Current sensing | Integrated 1-channel programmable CSA | Integrated 1-channel programmable CSA | Indirect current sensing |
| Operating temperature (Tj) | -40℃~150℃ | -40℃~150℃ | -40℃~150℃ |
| Package | VQFN32 | VQFN32 | VQFN32 |
From a technical approach perspective, the three products each have different emphases: the CCPD technology of the NSD3602S leans toward manual fine-grained tuning, with the current and timing of each stage independently configurable and a high degree of debugging freedom, making it suitable for projects with substantial EMC optimization needs and clear customization requirements for drive waveforms; the Smart Gate Drive of the DRV8705 leans toward automatic intelligent optimization, with the chip autonomously adjusting gate characteristics and a lower development threshold, making it suitable for projects requiring rapid implementation; the three-level stepped gate current control of the ST L99MH92 has a maximum drive capability of 120 mA, but it only supports the SPI interface, resulting in a relatively large initialization workload.
In terms of current sensing solutions, the NSD3602 and DRV8705 both use a conventional differential amplifier (CSA) and require an external shunt resistor, but offer high detection accuracy and fast response; the L99MH92 uses an indirect current sensing scheme without a shunt resistor, measuring the MOSFET on-state voltage drop and combining it with temperature compensation to infer the current, which can reduce BOM cost, but accuracy is greatly affected by MOSFET consistency and requires additional algorithm compensation by the MCU.
The NSD3602 integrates the CSA, overcurrent comparator, and a full suite of diagnostic protection into a single chip; combined with the supply chain stability and local technical support of a domestic chip, the overall system cost is competitive.
6. Flexible Dual-Version Adaptation, Covering Diverse Body Applications
The NSD3602 precisely matches the drive requirements of distributed actuators in the body domain, and its two variants cover body applications of different levels:
- NSD3602S:Suitable for complex applications such as power seats, power tailgates, and power liftgates; it can finely tune drive parameters and read fault codes through SPI registers, supports multi-chip daisy-chain cascading, and is suitable for multi-axis motor coordinated control; for nodes with high requirements for functional safety diagnostics and EMC performance;
- NSD3602H:Suitable for simple motor nodes with fixed functions such as window regulators, door locks, and electronic latches; hardware pin configuration requires no software initialization, reducing development effort and MCU resource usage, and is suitable for cost-sensitive projects.
Overall, the NSD3602 highly integrates three core functions—gate driving, current sampling, and diagnostic protection—and can cover the full range of body applications from basic door locks to smart seats. With AEC-Q100 Grade 1 automotive qualification and the supply chain, cost, and technical support advantages of domestic chips, it can help automakers and Tier 1 suppliers effectively shorten development cycles and reduce system BOM costs. It is a mature domestic solution for body electronics gate drivers.
For more information about the NSD3602 or to request samples, please contact: sales@chiplinkstech.com; Engineer Chen, 13924675549.

Sample Request Attached

WeChat Official Account