0755-82557621 sales@chiplinkstech.com Mon–Fri 09:00–18:00 (UTC+8)
Precision motion control · Components and solutions

Domestic Breakthrough! NOVOSENSE NCA1051 High-Speed CAN Transceiver: Breaking the Supply Chain Dilemma, Empowering Intelligent Connectivity

Lao Zhang had been frowning for three days. As the hardware lead at an industrial inverter company, he had just received notice from a customer—because a major international supplier’s CAN transceiver lead time had extended from 12 weeks to 28 weeks, a key project they were responsible for faced production stoppage risk. “Another supply cutoff!” Lao Zhang sighed; this was already the third supply chain crisis this year. Just as the team […]

2025-11-06 Solution Applications
国产突围!纳芯微NCA1051高速CAN收发器:破解供应链困局,赋能智能互联

Lao Zhang had been frowning for three days. As the hardware lead at an industrial inverter company, he had just received notice from a customer—because a major international supplier’s CAN transceiver lead time had extended from 12 weeks to 28 weeks, a key project they were responsible for faced production stoppage risk. “Another supply cutoff!” Lao Zhang sighed; this was already the third supply chain crisis this year. Just as the team was overwhelmed, young engineer Xiao Li pushed open the office door: “Engineer Zhang, maybe we can try a domestic solution—NOVOSENSE’s NCA1051.”

1. CAN Transceiver

In modern industrial automation, automotive electronics, and intelligent building control systems, the Controller Area Network (CAN) bus has become an indispensable communication technology due to its multi-master operation, fast transmission speed, and long communication distance. However, in a CAN bus system, there is a “contradiction” between two core members—the digital signals (TX/RX) output by the CAN controller (such as an MCU) cannot be directly transmitted over long distances and with interference resistance on the physical CAN bus (composed of two twisted wires, CAN-H and CAN-L, carrying differential analog signals).

As a physical-layer interface chip used to implement Controller Area Network (CAN) communication, the CAN transceiver is the key to resolving this “contradiction.” It is responsible for signal conversion between the CAN controller and the physical CAN bus: converting the CAN controller’s digital signals (TX/RX) into differential signals (CAN-H/CAN-L) transmitted on the bus; and converting the differential signals on the bus into digital signals that the CAN controller can understand, serving as the bridge between the two.

 

2. The Domestic NCA1051 Transceiver

A few years ago, when domestic chips were still regarded as a “backup option,” the engineers at NOVOSENSE Microelectronics (NOVOSENSE) were already quietly working away in the lab. They knew that to break foreign monopolies, they had to demonstrate real capability and make serious efforts. The birth of the NCA1051 embodies NOVOSENSE’s years of technical accumulation in the chip field.

NCA1051 is a high-speed CAN transceiver from NOVOSENSE that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The NCA1051 implements the CAN physical layer defined in ISO 11898-2:2016 and SAE J2284-1 through SAE J2284-5, enabling reliable communication at data rates up to 5 Mbit/s in the CAN FD fast phase. The NCA1051 provides thermal shutdown protection and a dominant timeout function for transmitted data. These features make the NCA1051 an excellent choice for all types of HS-CAN networks in nodes that do not require a silent mode with bus wake-up capability.

Functional Block Diagram

III. Core Technical Advantages

The NCA1051 CAN transceiver is designed to closely meet the practical requirements of industrial- and automotive-grade electronic applications, satisfying the stringent demands for high-quality communication in most application scenarios.

1. High-Speed Transmission + Low Latency, Ensuring Real-Time Control

  • The NCA1051 supports data rates up to 5 Mbit/s in the CAN FD fast phase, far exceeding those of traditional CAN transceivers (1 Mbit/s), and can meet the need for "large volumes of real-time data exchange" in scenarios such as variable-frequency control, motion control, and automotive electronics (e.g., synchronous transmission of motor speed, sensor data, and control commands);
  • Loop delay is <250 ns, far below the industry average (typically 300 ns+), ensuring "immediate issuance—immediate response" of control commands and avoiding control accuracy degradation caused by latency.

2. Robust Bus Fault Protection for Complex Environments

  • Industrial environments are complex and variable, and buses are susceptible to various voltage surges, such as high-voltage impacts from wiring errors, lightning-induced surges, and power supply surges. The NCA1051's bus fault protection reaches -70V to 70V. When the bus unexpectedly encounters high voltage, the chip can effectively protect itself and downstream circuits, greatly improving system reliability. Combined with overcurrent protection (limiting short-circuit current) and overtemperature protection (automatic shutdown when the temperature exceeds the threshold), this further enhances the system's robustness in complex environments.

3. Wide voltage compatibility + passive characteristics, reducing cost and improving efficiency

  • The NCA1051's 3V–5V wide supply voltage range allows direct connection to 3.3V MCUs (such as the STM32 series) and 5V MCUs (such as the 8051 series), without the need for additional level-shifting chips, simplifying the system architecture and reducing overall cost.
  • Passive characteristics: When power is disconnected, the CAN-H/CAN-L pins present a high-impedance passive state and will not affect normal communication of other nodes on the bus, making it particularly suitable for large multi-node networks connected in series (such as building automation systems).

4. Silent mode + TXD timeout protection, ensuring network stability

  • The NCA1051 has a silent mode, activated by a high level on the S pin. In this mode, the transmitter is disabled and the receiver operates normally, preventing a faulty controller from occupying the bus for a long time and avoiding paralysis of the entire network.
  • TXD dominant timeout protection: If the TXD pin remains low (dominant state) for a long time due to a hardware/software failure, after 800 μs to 4500 μs the chip automatically disables the transmitter and releases the bus to the recessive state, ensuring normal communication of other nodes.

5. Wide industrial temperature range + low power consumption, adaptable to multiple scenarios

  • The NCA1051 operates over a temperature range of -40°C to 125°C. It can adapt to outdoor equipment in extremely cold northern regions (such as charging piles and outdoor sensors), and can also withstand high-temperature environments such as industrial inverters and automotive engine compartments, enabling it to operate in complex and extreme industrial and automotive conditions.
  • In recessive mode, the typical current is only 5 mA, and in silent mode it is 2.5 mA. Combined with low leakage current when powered off, it is suitable for low-power scenarios such as battery-powered industrial sensors.

 

4. Typical Application Scenarios

The outstanding features of the NCA1051 give it broad application value across multiple fields.

1. Industrial Automation and Control

In the field of industrial automation, the NCA1051 can be used in industrial controllers, sensors, and drive systems to achieve reliable communication between control modules. Its data transmission capability of up to 5 Mbit/s makes it suitable for industrial scenarios requiring high-speed data exchange.

2. Automotive Electronics and Transportation Equipment

It can be used in application scenarios such as body electronics, in-vehicle sensors, and auxiliary control systems for new energy vehicles (non-powertrain). It complies with the SAE J2284 standard, features a wide-temperature design that withstands high temperatures in the engine compartment, has strong ESD protection, and supports in-vehicle CAN protocols such as NMEA2000 and ISO11783.

3. Inverter Air Conditioner Control

The NCA1051 excels in compressor circuit design for industrial inverter air conditioners. Its high reliability and high-speed communication capabilities ensure stable operation of the air-conditioning system under various operating conditions, while its domestically produced status also provides customers with a cost-effective solution.

4. Building Automation

In the field of building automation, the NCA1051 can be used in security systems, central air-conditioning control, and other applications to enable efficient and reliable communication among subsystems. It supports expansion to 110 nodes, meeting the interconnection needs of multiple subsystems in large buildings. Its passive characteristic ensures that a power loss at a single node does not affect the entire network, and its wide voltage compatibility allows adaptation to controllers from different brands.

 

V. Localization Advantages and Supply Chain Security

Against the backdrop of increasing volatility in global chip supply, the domestically localized status of the NCA1051 has become one of its core competitive advantages, effectively ensuring the security and reliability of product supply:

  • Independent Intellectual Property: It uses a fully forward design, owns all core technology patents, and does not rely on foreign licensing, fundamentally avoiding 'technology choke points'.
  • Stable Supply Chain Guarantee: NOVOSENSE Microelectronics, as a leading domestic high-performance analog chip company, has built a mature supply chain system for wafer foundry, packaging, and testing. Lead times are stable at 4-8 weeks, far shorter than the ultra-long lead times of major international manufacturers, effectively addressing the risk of 'supply cutoff and production stoppage'.
  • Full industrial-chain support: Leveraging NOVOSENSE's complete layout across "signal sensing, system interconnection, and power drive," we can provide customers with a one-stop solution of "CAN transceiver + sensor + power management," simplifying technical interfacing and supply chain management.

For many companies, choosing domestic chips is not only a cost consideration but also a strategic need for supply chain security.

 

VI. The Ending of the Story

Night falls, and Lao Zhang's office lights are still on. But this time, he is not worrying about supply cutoffs; he is planning the upgrade plan for the next generation of products. "Sometimes a crisis is actually a turning point," he wrote in the project summary report. "The NCA1051 not only solved our supply chain problem but also brought us new choices." From being forced to choose to actively embracing, this is the comeback path of domestic chips and a microcosm of the transformation and upgrading of Chinese manufacturing. On the road to high-quality development, such stories are unfolding in every corner.

For more information about the NCA1501 CAN transceiver or to request samples, please contact NOVOSENSE's officially authorized distributor: Email: sales@chiplinkstech.com; WeChat Official Account: Zhilianwei - Motor Control Chips. We provide product selection services and technical support and look forward to working with you.

Appendix: Key Specifications Table:

Parameter Category Specification Details
Standards Compliance Fully compliant with ISO 11898-2:2016 and SAE J2284-1 to J2284-5 standards; supports protocols such as CANopen, DeviceNet, and NMEA 2000
Supply Voltage Range VCC: 4.5 V to 5.5 V; VIO: 3 V to 5.5 V (for NCA1051N, VIO equals VCC, no additional configuration required)
Bus Fault Protection CAN-H/CAN-L pins withstand -70 V to +70 V high-voltage transients
Data Transfer Performance Up to 5 Mbit/s (CAN FD fast phase); minimum 10 kbit/s (defined by the TXD dominant timeout function)
Communication Real-Time Performance Loop delay: recessive→dominant ≤220 ns (typical 90 ns), dominant→recessive ≤220 ns (typical 100 ns)
Quiescent Current Consumption Dominant mode (TXD = low): 45 mA (typical); recessive mode (TXD = high): 5 mA (typical); silent mode: 2.5 mA (typical)
Operating Temperature Range -40°C to +125°C, maximum junction temperature 150°C; thermal shutdown threshold: 155°C to 180°C (typical 165°C)
Core Protection Functions Overcurrent protection (short-circuit current ±40 to ±100 mA), overtemperature protection, TXD dominant timeout protection (800 µs to 4500 µs), reverse power supply protection
Passive Bus Characteristics When power is disconnected, the CAN bus presents a high-impedance passive state, with leakage current of only -5 to 5 µA, without affecting communication of other nodes.
Package and Compliance SOP8 package (dimensions 4.90 mm × 3.90 mm), RoHS compliant
Node Support Capability A single bus supports at least 110 CAN nodes, suitable for large network expansion requirements
ESD Protection Level HBM (Human Body Model) ±8 kV, CDM (Charged Device Model) ±2 kV (all-pin protection, suitable for industrial environments)
附样品申请二维码

Sample request attached

微信公众号二维码

WeChat Official Account

← Back to Solutions