Hamburg, September 2, 2019 — TRINAMIC announces the TMC2590, a two-phase stepper motor pre-driver IC with robust design and high power density. Covering a wide range of stepper motors, it operates from 5 V … 60 V DC and is a cost-effective solution for many applications, including textile, factory and laboratory automation, 3D printing, liquid handling, medical, security, pumps and valves, and POS equipment.
The TMC2590 is Trinamic's latest two-phase stepper motor pre-driver IC. The low-power, EMI-optimized IC includes protection and diagnostic functions and enables a miniaturized design for a highly competitive solution.

“The pre-driver IC enables powerful, flexible designs with high current capability and is a perfect match for motors using external MOSFETs. By reducing the application’s bill of materials and required board space, it creates an on-chip solution that greatly reduces design complexity and development time,” explains Michael Randt, Founder and CEO of Trinamic.
Through the Step/Dir interface, SPI and standalone operation, the TMC2590 can be used with industry-typical motion controllers to generate step signals. Regardless of the motion controller used, to ensure microstepping, the TMC2590 uses MicroPlyer™, Trinamic's step-pulse interpolator, for advanced 1/256 microstepping from 1/16 step or lower.
The TMC2590 is highly integrated and efficient, offering industry-leading technologies including StallGuard2™ (sensorless stall detection and mechanical load measurement) for sensorless homing and stall detection, CoolStep™ (current-saving control) for load-dependent current control, which can save up to 75% energy, and SpreadCycle™ (high-precision chopper algorithm) for highly dynamic positioning. A full set of diagnostics can be accessed through the interface, while integrated protection can be adjusted to suit different power stages and load conditions. These include short-circuit protection, open-load detection, temperature sensor and undervoltage detection to improve system reliability.
The driver is easy to implement and provides extensive support for rapid design cycles, even shortening time to market. The TMC2590, the open-source TMC2590-EVAL, and the TMC2590-BOB are all scheduled for September availability.

Features:
- 2-phase stepper motor driver for 1 A … 8 A using external N- and P-channel MOSFETs
- 5 V … 60 V DC operating voltage range
- Low power consumption and high-temperature tolerance
- SPI and Step/Dir interfaces
- Integrated protection and diagnostic functions
- Microstepping, StallGuard2™ (sensorless stall detection and mechanical load measurement), CoolStep™ (current control for energy savings), and SpreadCycle™ (high-precision chopper algorithm)
- 7x7mm TQFP32-EP package
Applications
- Textiles, sewing machines
- Factory and laboratory automation
- 3D printing
- Liquid handling
- Medical
- Office automation
- Printers and Scanners
- CCTV, Security
- ATM,POS
- Pumps and Valves
- CNC Machine Tools