On June 11, 2019, Hamburg, Germany, TRINAMIC launched the silent stepper driver chip TMC2209. It supports 2A RMS current (2.8A peak), voltage 4.75-28V. It can use StallGuard4™ and StealthChop2™ (quiet chopper mode) simultaneously, supporting quiet operation and sensorless torque detection without limit switches.

Trinamic's advanced StealthChop2 chopper ensures noiseless operation, maximum efficiency, and optimum motor torque. Its fast current regulation and optional SpreadCycle combination enable highly dynamic motion, while adding StallGuard4 for sensorless homing. Integrated power MOSFETs handle motor currents up to 2A RMS, with protection and diagnostic functions for stable and reliable operation. The easy-to-use UART interface opens tuning and control options. Application adjustments can be stored in OTP memory. The industry's most advanced Step/Dir stepper motor driver family upgrades designs to noiseless and most precise operation, enabling cost-effective and highly competitive solutions.
| “Since the TMC2208 was widely adopted in 3D printers, we have received a lot of useful feedback from the community,” said Michael Randt, founder and CEO of Trinamic. “This led to the TMC2209, advancing 3D printer development while providing new use cases for other software-defined smart desktop applications, further driving the Fourth Industrial Revolution.” | ![]() |
The TMC2209 uses a QFN28 package, offering an option to upgrade existing designs.
CoolStep™ (current energy-saving control) current regulation can save up to 75% energy, keeping the chip cool to the touch.

SpreadCycle™ (high-precision chopper algorithm) enables highly dynamic motion control; StallGuard adds sensorless torque detection to applications; the easy-to-use UART interface allows adjustments that can be stored in OTP memory embedded in the TMC2209. Through the advanced features of the TMC2209, Trinamic ensures manufacturers can bring these applications into the future.
Features and benefits:
- 2-phase stepper motor, coil current (peak) up to 2.8 A, 2 A RMS
- STEP/DIR interface with pin-selectable 4, 8, 16, or 32 microstepping
- Smooth operation at 256 microsteps via MicroPlyer™ interpolation
- StealthChop2™ quiet chopper mode for silent motor operation
- SpreadCycle™ high-precision chopper algorithm for highly dynamic motor control
- StealthGuard4™ load and stall detection for StealthChop
- CoolStep™ current control saves up to 75% energy
- Low RDSon, low heat: LS 170 mΩ and HS 170 mΩ (typical at 25°C)
- Voltage range: 4.75 … 28 V DC
- Low-power standby
- Internal sense resistor option (no sense resistor required)
- Single-wire UART and OTP for advanced configuration options
- Integrated pulse generator for standalone motion
- Comprehensive protection and diagnostics
Patented technology:
- MicroPlyer™ (Microstep Interpolator)
- CoolStep™ (Current-Saving Control)
- short detection (short-circuit detection)
- SpreadCycle™ (High-Precision Chopper Algorithm)
- Stall detection (stall detection)
- StealthChop2™ (Silent Chopper Mode)
- StallGuard4™
Applications:
- 3D Printer
- Printers, POS
- Office and home automation
- Textiles, sewing machines
- CCTV, security surveillance
- ATM, cash recyclers
- HVAC
- Battery-powered devices
